Yep ^^^^ what he said
Type: Posts; User: Cookr
Yep ^^^^ what he said
Just and update that I swapped out DV tanks and it solved the issue don't know what happened on its way here but something did
Got this machine in the shop yesterday and got it cleaned up and hooked up the finisher and all that but when I went to make copies or prints there is pretty much nothing on the sheet it is very...
one time I didn't have the ADF serial number programed in and in cause the lines but it was on a B&W machine im pretty sure. Good luck
Second these guys definitely looks something charge related
Wondering if there is a way to default the print settings so that it will time stamp every time its prints something. they can do it when copying and I know it can be set like that on konica but I...
I would be surprised if this box was not doing what you described lol but they hit every thing I know and I believe the soft switches are 5-1 and 23-3 make them a 1 if not already and yes you should...
OK well since i posted this I have made sure firmware was up to date and I removed the old drivers and installed the newest ones from the site which is what Muratec Tech support said to do and that...
Ended up being a bad cyan IU TCR must have crapped out but its working now
Yeah unfortunately I did that even though it was already H5A0A0. It did seam to work a little better but i doubt it lol
Working on this machine and im pretty sure its the supply motor but I was just wondering if anyone knows of if there is a load check for the motor. Its the cyan supply motor M12. I looked in the...
They are actually pretty easy to repair also. Ive done probably 50 in my time and I would say most of them still work but we don't really have many of those machines left out there.
You...
Got a call for this machine MFX-3535 when they were printing a PDF and it seamed to be only that certain file while i was there the machine would freeze right up and sometimes the screen would get...
http://www.copytechnet.com/forums/konica-minolta/115327-forward-tx-error-scan-email-office365.html
Yeah i tried all kinds of things lol i even used the special firmware to make it an "e" series machine that dud work but the i finally got ahold of the old company becase they uploaded a custom boot...
Hmm worked on my C284 also
There probably is not away to do it bucase i have been searching forever but I figured id ask lol. Bought a used machine its a BH C454 and the old owners changed the CE password and now I can not get...
Customer with a BH 283 set up to scan to a folder on the server and the problem is that after time the machine starts getting a log in error and after a certain number of tries it locks out the other...
Make sure you have the the network setting correct as in Network discovery, file and printer sharing Etc. might wanna check see if its the firewall things of that nature. Good luck
Anybody be able to help me out with firmware for a C353? Thanks
Was getting same code on a DF-701 after replacing many things I found in the service mode under ADF I believe there is something call home potion sensor adjust or something along those lines and it...
Working on Bizhub 353 with a fiery first problem was they couldn't print when I got there I noticed the cable from the fiery to the machine was broke (apparently somebody dropped a ream of paper on...
Tired everything suggested but no luck with that. Ended up going into the service mode and adjusting the home position sensor and that solved it...so far lol but thanks for the help.
lol sorry its actually on a Muratec MFX-C3680 which is the equivalent to a BH 364 I believe
Oh yeah another question is there a way to just disable the second side scanning and make it work just like a RADF so it just pulls the paper back in?