I have 2 Pro C751ex machines that have the same problem. When printing it will not replenish the sub-pump tank in the Magenta or the Black. My coeds are Sc400, SC402, Sc368, Sc365 and this all...
Type: Posts; User: imthinman
I have 2 Pro C751ex machines that have the same problem. When printing it will not replenish the sub-pump tank in the Magenta or the Black. My coeds are Sc400, SC402, Sc368, Sc365 and this all...
Anybody know where to find the egrit controller firmware. I looked for it but had no luck. I had a hard drive crash and I can not find where on Ricoh's website it is.
Anyone have a couple of Fiery EB1357s for sale contact me at Collins.bill80@yahoo,com
Has anyone tried to install a scanner from an S model into a plain C900? I have a spare scanner unit that I would like to use on a printer model.
I have oil lines about 5 mm random banding. It seems to be worse when starting a job and fades then returns at rndom intervals. I haves replaced the oil applying unit,oil drive gears, fusing belt and...
Three things usually cause this jam. Check the plastic plate on the left. The front pin is plastic and gets bent causing a misallignment. Second after 2-3 million on the bottom side of the same tray...
I see this as a debate between people who place their faith in men and those who place their faith in guns. Historically the people who placed their faith in guns come out ahead. The people putting...
At a copy tech convention a professor decided to gather data on tech sexual activity. So at the podium he asked how many had sex daily and many raised their hands. He then asked once a week many...
Do it the old fashioned way. Download the twain driver from Ricoh, if you are connected launch a scan receiving program such as Acrobat and pull the docs to your PC.
[QUOTE=mrwho;346163]And, now that I'm on it, what about the Pro907?[/QUOTE
After a year and a half on high intensity use (2-3 million a month) on 4 Pro's and 2 MP 8000's here is what I am seeing....
I need a little help. I need the oldest version of firmware for the MP7500. The newer versions do not work with scan router lite and I am stuck with a customer (60 machines) that has one machine that...
Remove the drum unit and rotate the the slotted gear driving the drum cleaning brush and coil. You probably have broken teeth on the gear, bent coil, or globs of hard toner in the coil. Failing to...
Not long after I started working in the industry. I was delivering a new Canon 6060 to the companies largest customer. While unloading the 6060 rolled off the tailgate and turned over. I was...
error 33 on miratec 2830
Does anyone know the service mode acess for this POS copier
The only god we pray to here is the copier god. Please don't jam,,please don't jam,, you must sat it 5 times a day or you will go to hell. Imthinman
Autocad??? Your problem may be in some sort of complex graphic the machine does not understand. Try to borrow a PS chip and then load a PS driver. It may help. Imthinman
I have a customer with an A045 wide format copier. It has a spot on the edge. I hate to have to buy a drum ($3000) for this if I can avoid it. My question is that long ago you could cover a bad spot...
Does anyone know a good reliable aftermarket vendor for Konicaminolta parts. I inherited a Bizhub C6500 and am in need of a good supplier for parts.Please e-mail me here or imgsrcsvcmgr@yahoo.com....
OK, I need help this time. I have a C6500P with a booklet finisher on it. The machine runs all paper longer than letter Long edge feed. It jams at the rollers in front of the junction gates for the...
As long as you replace it with the same model. You need to swap the hard meter underneath the laser cover, and the two approximately 1/4" EEPROM'S on the controller it is done after changing the...
I have seen this problem many times. First the fuser issue the dimples in the belt is the hot roller underneath the belt disintegrating and will not last long. I think the dogearing is being caused...
I here this from time -to-time. Usually I check the meter and say we owe a lot of credit for the 4 million bad copies they must have gotten.
Sounds to me like a thin paper jamming problem. The drive rollers on the right side of the drawer often become separated due to jams caught between the rollers and the trays will often wad up and...
I am Canon, Ricoh ,Mita, and Oce trained on various models. The difference maker is your in house training. Focus training on trouble areas regardless of model. Encourage them (if they believe they...
Here's my 2 cents
1. Response time can be improved by asking at the time of the sale if the response time is guaranteed and if so by what means. For example $100/call for late helps motivation
2....