Search:

Type: Posts; User: PoonKing5000

Page 1 of 5 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    7
    Views
    2,125

    Re: Bizhub C6500 Duplex Registration

    Anyone???
  2. Replies
    7
    Views
    2,125

    Bizhub C6500 Duplex Registration

    I have a machine with about 4million copies on it and the second side of a duplexed copy is about 1/16" shorter (left to right) that the front side. The lead edge lines up pretty good but the trail...
  3. Replies
    2
    Views
    1,684

    IR2022i Send Report

    Does anyone know if there is a way to disable the TX Send report but leave the TX Fax report enabled on the IR2022?

    On the bigger machines they separate the two in Report Settings but not this...
  4. Replies
    4
    Views
    2,259

    it shows on both copies and prints

    it shows on both copies and prints
  5. Replies
    21
    Views
    4,900

    [CQ] Thanks for your reply. My client is using...

    Thanks for your reply. My client is using recommended stock. In my case it also appears when printing on plain paper just not as visible as when printing on heavy stock but the paper they are using...
  6. Replies
    21
    Views
    4,900

    [CQ] Has there been a resolution to this problem? I...

    Has there been a resolution to this problem? I have a machine that is displaying the same issue.

    Andy
  7. Replies
    4
    Views
    2,259

    Bizhub C6500 Vertical Bands

    I have a buzhub Pro C6500 that when printing greyscale i am getting vertical bands in the print that never move on the image. I have recently done a 200K PM, Drums and Developer. The bands are on...
  8. Replies
    3
    Views
    1,011

    Thanks for the info. I ended up swapping a toner...

    Thanks for the info. I ended up swapping a toner density sensor from the Magenta DV unit and the cyan brightened right up. Its still slightly blotchy which is probably the developer from running...
  9. Replies
    3
    Views
    1,011

    DP-C262 Light Cyan

    Hey guys i have a Panasonic Workio DP-C262 that has very light/blotchy cyan copies. All the other colors are perfect just the cyan. The drum count is 1174 and developer is 19415.

    Any ideas?
    ...
  10. Replies
    8
    Views
    2,395

    It could be the LCD Lamp Inverter PCB in the OP...

    It could be the LCD Lamp Inverter PCB in the OP panel. The part number is FM3-5744. Also it could be the memory DIMM PN WA7-5211.
  11. Replies
    4
    Views
    4,374

    [Error Code] The error is the horizontal registration. It is...

    The error is the horizontal registration. It is located on top of the feed assembly, you have to remove the assembly to get to it. There will be a little motor that drives the assembly and usually...
  12. Replies
    26
    Views
    18,354

    My company's email is hosted through gmail and i...

    My company's email is hosted through gmail and i have an IRC3220 with an imagepass C2 sending emails with this configuration with no issues. Teckat, what is the reason you say the smtp cannot be...
  13. Replies
    26
    Views
    18,354

    change both SMTPTXPN and SMTPRXPN

    change both SMTPTXPN and SMTPRXPN
  14. I have seen that exact error a few times where i...

    I have seen that exact error a few times where i have replaced an old machine and put the same IP address on a new machine and then try to access the RUI on the new machine. It will connect but...
  15. Replies
    26
    Views
    18,354

    Gmail requires you to use a non standard smtp...

    Gmail requires you to use a non standard smtp port for sending. You must enter service mode level 2 Copier-Option-Body and change the SMTP port to 587.
  16. Before you try all of that try clearing your...

    Before you try all of that try clearing your temporary internet files and such. I have seen on a few occasions when replacing machines the temp files must be cleared before i can connect to the RUI...
  17. Thread: ir 3570

    by PoonKing5000
    Replies
    5
    Views
    1,419

    Or if you want to make the copier wireless you...

    Or if you want to make the copier wireless you could use a wireless gaming adapter like a Linksys WGA600N or Wireless Bridge WET610N.
  18. Replies
    0
    Views
    1,082

    Mita DC-3648SR

    I am looking to reset the "Call for service" light on an old DC-3648SR. Can anyone tell me how to enter service mode and which counters i need to clear for this?

    Thanks
    Andy
  19. Replies
    3
    Views
    682

    I never noticed before whether that fan stays on...

    I never noticed before whether that fan stays on all the time. The customer claims that it used to shut off in sleep mode but now it does not. It didn't seem loud when I was at the machine but maybe...
  20. Replies
    3
    Views
    682

    IR2020 Fan running

    I have a IR2020 that the fan on the left side door continuously runs even when in sleep mode. Has anyone had a similar problem or does anyone know what causes that fan to run? I have cleaned out the...
  21. E020 drum/developer-related error xx=01: Y...

    E020
    drum/developer-related error
    xx=01: Y xx=02: M xx=03: C xx=04: K xx=00: no color distinction

    I could not find info on the sub code except the 04 which indicates an issue with the Black. Is...
  22. Replies
    3
    Views
    1,163

    Make sure you are using the correct print driver....

    Make sure you are using the correct print driver. I have had many issues with customers installing the PS driver then complaining about slow pdf prints. Make sure you have the PCL5e or PCL6 driver...
  23. Replies
    2
    Views
    657

    E110-The operation of the laser scanner motor is...

    E110-The operation of the laser scanner motor is faulty.
    0110-The rotation of the Y laser scanner motor is faulty.
    The motor lock signal remains in an unlock
    state for 1 sec or more while the...
  24. # 802 Cause: In the system control setup (user...

    # 802
    Cause: In the system control setup (user mode), the
    settings of the SMTP server for e-mail/i-fax are
    wrong.
    The setting of the DNS server is wrong.
    The attempt to connect to the DNS server...
  25. Replies
    3
    Views
    812

    Yeah I figured that. I just thought since i have...

    Yeah I figured that. I just thought since i have both of these units in the field it wouldn't hurt to try to get both.
Results 1 to 25 of 112
Page 1 of 5 1 2 3 4