Hello all.My client has a toshiba estudio 257 which was stuck in the first screen.I entered service mode and formatted the hdd but unfortunately after the reboot it popped an error f520 .I found that...
Type: Posts; User: lef3pap
Hello all.My client has a toshiba estudio 257 which was stuck in the first screen.I entered service mode and formatted the hdd but unfortunately after the reboot it popped an error f520 .I found that...
Thanks a lot my friend.Have a nice day!!
Since it is an old photocopier it is a bit difficult to find the part number for the fusing unit 220V.Any help would be appreciated!!(xerox document center 440st)
thank you very much my friend!!!
hello everybody.i need the part number of the transfer separation unit which is located at the left side of copier.it seems like this 28203.it is broken and it makes jams.Thank you.
many thanks one more time friend.have a good day
Goodmorning.I can't find the parts number of the trays pickup or feed rollers.Can someone help?TAlso the front cover is broken inside and it shows that the front cover is open?I also need the part...
check if the lower fusing frame is ok.check the base of the hot roller and also change the pressure spring
The first thing that you have to check is if the copy is printed ok on the drum surface.Make a jam yourself and watch.If the copy is ok on the drum then check the transfer unit.If not check the metal...
thank you all for your answers.problem is solved by replacing one of the 3 sensors which was a mess and couldn't be cleaned.Have a nice day all of you!
i guess that the gear is cheap.If you have time you can open it.Good luck
rub the separation pad and make it more rough.The pad is probably the problem
http://support.lexmark.com/index?page=content&id=HO3155&locale=EN&userlocale=EN_US
oh friend good luck.If you are a simple user then call a tech if not then you have to see this.give a print and see if the roller is turning.if it doesnt you have to dissasemble the printer and reach...
slimslob you are from my favourite members.where did you find that?service manual says these :
ID sensor adjustment error
When the Vsg error counter reaches "3", the machine detects "SC400".
The...
26902
ooops too little image.is it on the transfer belt unit?
where is that metal brucket with the 3 holes?
26900
Hello everybody.I have a tech friend who doesn't have access here and he asked my help.He has an mpc 2550ricoh machine and after one copy it shows sc 400.I followed the service manual and told him to...
It would be really expensive to order a full fusing unit.Try replacing the lower part first.I guess that the hot roller base broke (that is the common problem) so the solution is changing the lower...
check and see if the drum unit is rotating .lock the switches and see what happens.I don't think it is a laser issue
i am really gratefull my friend for your help.059k69800 is covering me for everything.Thank you again.Are you a xerox technician?I can't find nowhere any service manual for xerox photocopiers so i am...
I had the same exact issue.What i did is this : i replaced everything on the fusing unit.Thermistors, hot roller,the belt ,the main jack of the fuser ... Everything.After a few minutes sc 565...
hello.i need the codes of the feed rollers for the cassettes for xerox wc 5645.how many do i have to take for each cassette and if there are separation roller or anything else.So i need to know and...
my friend i found the service manual and i checked it ,it is the right part.Thank you very much and if you ever need help with ricoh photocopiers pm me.Thank you very much.have a nice day.