Question bouncing around the office this day is, if the DV is the same, MD451MD and AR455ND? Same quanity, nearly the same copier....
The MD451 is about twice the cost.
Who knows this.......?...
Type: Posts; User: Zookeyman
Question bouncing around the office this day is, if the DV is the same, MD451MD and AR455ND? Same quanity, nearly the same copier....
The MD451 is about twice the cost.
Who knows this.......?...
Sweet. thanks. will ck grounds also.
'k, will give that a shot.... Thanks!:cool: I'll post results as I have them.
Thanks for the reply. The full maint. was performed 46XXX ago. This happens to copies, scans and out bound faxes. Only when the scanner is used. Prints are always perfect. It seems somewhere in...
Working on an Sharp Ar-m355N
This seems to happen (when it happens) at anytime, start shading the copies/scans and gets worse till it is almost un-readable. I Cked for errors, none listed. Properly...
Arn't they ALL!!!!!!!!!!!!!!!!!!!!!!!!!! hehehehehe............. I kid.
Thanks for the replys.... I'll give it a try...
Thanks again, I'll post our results.....
:cool:
Working with C352. Paper size auto select works THROUGH the ADF and print services, for ALL sizes of paper. Put the paper on the glass and it ALWAYS calls for 11X17 paper, regardless of actuall...
Here is more info on the problem with this unit. Checked fuses in the back of the unit, and the pins and connectors at the fuser. All good.
This error takes over 4 miniutes to appear after...
Sweet, I'll give that a look also.
Thanks.
Thanks for the reply, That gives me a direction to go. I've even checked the inner, lower door and latch hook just to be sure and its in tact as is the striker portion.
I'll give these ideas a look...
Looking at an C550 and tray 4 skews and sometimes will wrinkle the paper. Tray 3, right beside 4, is fine.
The entire tray 4 has been replaced along with all rollers and still skews.
Ideas?
Replacing the control board did the trick......
Thanks to all that looked and responded. MUCH appreciated:)
Well it seems that this is a control board as nothing seems to cure the issue. I have one on the way. Will update after installation and tests.
Again, thanks to all that responded.
Thanks for the tips, I'll try them and get back with an up date.
The motor that moves the hole punch side to side keeps trying to push the punch unit inward towards the back wall of the finisher. I can run the service mode tests and it seems to function per...
I am Fistandantilus.... Master of neigther here nor thereIn other words, technician.......:cool:
Thanks to everyone for the input. I'll try these and have a go at it.
14974149751497614977
The color sample really is like the gray and black, as far as the shading dark and light goes, it just is not showing well in the upload...
1495614957
This is the best I can do for now as my boss is still in California and the San Disc with the test scans are locked in his office. black does it also on test.
Thanks for the responce.
Hello Blackcat, I have run test pattern and sent them to Kyo for their review and recieved the usual responce, start with part "A" and replace through part "Z" till the issue is corrected.
Um, I...
I know, I haven't been able to up load a decent pic as I no longer have an San Disc to send the print to, and my phone camera just doesn't do it.
If someone had this, they would know exactly what...
WOW... spamming me? I have all the service, parts and user manuals.....
Striping the full image and not the borders/margins. all colors, not pin fine lines but more faded in and out colors and differing widths depending on the color needed at that part of the image. At...
[QUOTE=10871087;1693]We have all voted for the worst copier ever, why dont we switch it up with:
What was the BEST COPIER EVER MADE?
My younger brother. He can copy ANYTHING!!!!!! :}
...