Try to update the firmware.
Type: Posts; User: barratec
Try to update the firmware.
Yes, continuosly. i think some win11 update.
Non credo sia possibile.
Me too!:mad:
Installing XPS river solves too.
Drum unit cyan.
You are right! dark background(caused by developer) and blowing toner on the laser unit are typical in MP2501 machines!
Check laser unit!
what about the gears in the developing unit?
Hi,
I think it's the latest one.
I hope to go in Brazil soon. Bye!
hi!
To enter in SP mode you have 2 ways:
-launch the copier app and digit on the keyboard that is displayed the same service code of new ricoh controller(reset, 8,0,6,1,8.........)
-on the...
Hi, if you print with PCL driver try to print with XPS. I had something similar with a customer.
thanks in advance!
barratec@tiscali.it
I had the same issue with a mp2352. The problem was the network support firmware not updated.
You can try the procedure described in the file attached. I'VE NEVER TRIED IT !!!!
Thank you so much!!!:)
....typically smartphones!
Try the supervisor account. If no one changed this account you can reset the administrator password.
name account: supervisor
password: null
Hi, try NVRAM of controller GW.
[QUOTE=Codex;489321]picked up this old thread, because i have exact the same problem with our machines (Aficio 1060 to MP 8000), We use only original Ricoh TYPE 9002 Toner, and i'm sure this is the...
Are you sure the machine is a SP model with GW controller?
It could be a LN model with network interface and only Network twain driver.
Hi! try to check the gears in the dev unit. May be are broken, it happens often on the 2000-2500-3025..and so on series of ricoh machine.
hi! try this: sysadm
It's possible! I did it many times using a SD card and user tools( system setting/administration/tools/backup address book) with no issues.