Search:

brought it back to workshop and ran 500 sheets with no lines so didn't fit any other parts, took it back to customer and it's been working fine for a week, now they rang to say the issue has returned...

I've got a lot of good answers here thanks everyone I'll have a good crack at it tomorrow and post back if I sort it.

LEF

I did notice that after i had tried all those parts if it's SEF it didn't do it but it could just have been a coincidence, as soon as it was LEF it did it again. I was out of gas at that...

Have a C458 putting solid vertical bands on the prints, see attached. So far it does it with K and C and just started with M. It starts off feint then gets more solid in a few copies, it doesnt...

I've fit a few of these, easy job and not had any callbacks as of yet.

intermittent jamming from all trays with 99-02 code, manual is "super helpful": 59278

its a newish machine with approx 80k on the clock, suspecting the registration sensor PS1 but just wondering...

unfortunately not but thanks mate that would have been great. Hopefully i've ordered the right stuff off amazon got some ddr3 sodimm to try

thanks yeah will try that and update the outcome

we got lk114 and the current ram is embedded

Anyone know what kind of SODIMM the C258 series takes? I don't fancy spending silly money on a UK-211 when all it is is laptop memory.

it's says all drums and all devs installation error

has anyone ever seen any the attached error before? It happens randomly throughout the day and will go if power is cycled. The firmware is up to M1. Have checked all the connection to the FSB and...

Anybody ever used an IU612 from a c452 on the C654e machines that take an iu711?

Nope! haha oops , it's a bizhub c224e :rolleyes:

Check number 5 on the pic isn't broken. Also post the jam code from jam counters in service mode like 66-01 etc, not the one you see on screen

47423

Do you mean to monitor each accounts usage or the machine counters in total?

If you want something to monitor machine counters, print audit do some good software. If you mean monitoring an...

The c308 uses a different charge assembly on the drums than the c284 so I wouldn't recommend doing this, you may end up with at best a dev & drum unit failure or at worst a broken main drive unit.

Have an issue where mono black prints are coming out fuzzy with white spots. It happens on halftone black 1 pc 255 density but doesn't show up on 64 density.

Tried PRCB, Firmware, PH Unit, HV...

what is solenoid called in parts manual ? is it the sd101?

what fixed your issue?

thing is it’s intermittent jamming, it’ll stop just after the reg rollers so not completely convinced that it’s the mylars, it’s a chargeable customer so don’t want to fit this drive pack and it...

thanks

how do you get to the mylars?

also any part numbers for the drive pack?

anyone have any instructions for replacing the mylars please?