Search:

I have a 672 code on a Ricoh 2851 after a long please wait condition, tried reseating connectors to no avail. Any ideas would be greatly appreciated.

My customer called and told me the machine has SC142 code, I have not been to the account, I am going in the morning. Anyone seen this code before, what should I look for when I get to machine?

On a SP4510 the customer replaced toner with a OEM cartridge and got the message "set toner cartridge correctly" , the old cartridge was generic. I tried a new cartridge out of the box and got the...

Finally got back to machine with duplex problem today. There was a piece of mylar that was interfering with paper as paper was exiting duplex turnaround. Thanks everyone for your input.

I have a KM Bizhub 223 that jams every time in the duplex vertical turnaround after the paper passes the upper sensor. I am not an experienced Konica Minolta Tech and would appreciate any assistance.

The reason I am inquiring about hard reset is; the I T guy at an account is unable to get the machine to scan to a network file. And he thinks it a hard reset my clear the way for him. ???

What is the best way to do a hard reset on the Ricoh MP2851 and are there any precautions to be aware of? Any and all responses are greatly appreciated.

It was an oem kit, I went to the account yesterday and changed the paper type to thick, ran some prints and it seems to be working. Thanks for your input!

I installed a Maintenance Kit ( feed roller, transfer rollers and fuser) and now the machine will not fuse the image intermittently, like 1 out of 50. This problem was not present before I put in...

I have no training on Toshiba equipment, I am trying to help a non-profit org. that helps homeless people. They were donated a E-Studio 4045 and it has a CD-71 code. I checked the waste toner area,...

I have a E Studio 232 with no power, the previous tech replaced fuser lamps, thermistors and power supply. I found a completely dead machine with power going into the high voltage power supply and...

I am working on a Ricoh 3045 and I wanted to change some settings in user tools, the message I got was "you do not have privileges to use this function" , all I wanted to do was to change copier...

Problem solved, the ports were incorrect, thanks for all the input.

I purchased a used Ricoh MP301 for home use and when I connected it via the usb port my computer says the printer is offline as if the printer has no print function, when I press printer on the home...

I am a independent, not affiliated with Ricoh, where can I get firmware for the MP2851?

I am going to the location in the morning, is there anything in particular that I should look for?

I have a customer at a church that has a Ricoh MP 2851, their IT guy is attempting to get the machine to scan to email. the machine scans the document and at bottom of screen it says "processing"...

Thanks for the reply, I appreciate your help. This problem occurred after the customer replaced the cartridge, is their something the customer could have done by the way they installed or removed...

Lexmark X658 has jam code 242.09 and 202.13 and has no printed image, just loose toner on jammed paper. Any advice is appreciated.

The customer reported a defective toner error 31.01, I cleaned the contacts and the message cleared, and the machine attempted to print out backed up faxes and jammed, I don't remember the jam error...

I have a Lexmark X658 that has continuously jammed after customer replaced the toner cartridge, also there is no image on the or prints. The fuser was so jammed with paper that I replaced it too. ...

I have a Ricoh MP 2851 that will give me a SC820 only when switched on and that is intermittent. After turning machine off and back on the code goes away and comes back only when turned off for a...

Are the Drum Units and Toner for Ricoh MP201 and MP301 the same, part #s are different, yet they look identical, is the developer different?

I have a Ricoh 2025 that had a flaky touch screen, I replaced touch screen and it will not respond at all. I tried the screen adjustment procedure ( 1993, c/s 5 times) when I touch the screen...

I have a Bizhub 283 that sends faxes ok but will not receive all the time, if you call the fax number it is busy. The phone company says the line is ok. Any help is appreciated