Hello copier_tech,
Is there also the SST softw included + the FW upgrade procedure for this machine?
Can if use any type of 2.5" HDD for this copier?
If not, what HDD do i have to order?
...
Type: Posts; User: brecht2
Hello copier_tech,
Is there also the SST softw included + the FW upgrade procedure for this machine?
Can if use any type of 2.5" HDD for this copier?
If not, what HDD do i have to order?
...
Hello,
That's exactly the problem, i can't download the FW anymore for this model.
It isn't available anymore on their website.
Somebody who's can provide me the latest FW please?
Kind...
Hello,
When my client send a print to his Canon he's got this error: "E602-1112"
After a reboot the Canon begins to print.
These steps always repeat....
I read about a HDD failure.
What steps...
Hello KYO_OEM,
My ebay code dimm has been arrived and installed but no luck....:(
Screen is still stuck at the 'welcome' screen.
I've waited more than 1 hour.
I saw r/w on my usb flashing many...
I've bought this code dimm...
Kyocera Printer Memory Module A0219AME + GH | eBay
This dimm seems to be another review (newer than mine).
I'll keep you in touch after the installation!
grts
Dear Kyo_oem,
I'm was thinking why i have to swap the good code dimm with the bad one?
Why i can't upgrade the FW with the good one without swapping this dimm?
Could you explain this to me...
Did you wait up to 30 minutes with mounted code dimm? YES
Did your key led is flashing during "Welcome" message? NO (read/write led) USB Stick is Kingston 4GB
I'll order new code dimm on ebay. I...
Hello,
I've took the code dimm out of the machine and got this;
47332
Hello KYO_OEM,
Thank you for the advice.
It's difficult to find spare parts for this model.
I found a 2nd hand machine for 20€ on a website with a broken transfer belt but i have to take the...
Hello,
I hope someone can advise me but i have a serious issue with my TA 300Ci.
I tried yesterday to update my (good working) TA300Ci with the latest FW V16.24.0010 (2016-08-18).
The original...
Hello,
Problem solved by swapping the green relay pwb (next to the orange relay pwb) who's connecting the drums and dv's.
DV Magenta toner values again +400.
Anyway thx to all!
Hello blackcat,
I've changed already the CMY DV motor without result...
Monday i go back and change the DV M unit with a new one (not a used one).
I can still print in B&W.
Hello,
I have a problem with a C7103 on a TA 250ci.
I got in U155 (Toner senor output) "26" instead of "+300".
I tried the DV M in another TA300ci and there is de DV M working perfect!
I...
Ok, i'll give it a try. Within the next coming days i'll go to this client and will left my experience on this discussion.
Anyway thanks for the fast reply!
kinds regards
Hello,
Is it possible to install on an Imac (with OS X v10.11) a KM-C3225 MFP?
The available driver is only OS X v10.4 on the kyo website.
Will this one work to?
Anyone who has Mac experience?...
I changed the registration parts with the drive assy.
no recall since 3 weeks.
PS: I've checked the size indicator.
Normaly when it is the size indicator jam will happen after the 1st...
MFPTech,
You Mean the cushion? (see attached example).
Already done without result.
tomorrow will be already my 3th time in approx 4 months i've to come back for the same issue. :confused:
Hello,
Tomorrow i'll go to a Taskalfa 400ci with a DF760(B).
Sometimes C8140.
1st visit: Changed solenoid and spring.
2nd visit: changed main PWB finisher.
Now i saw a new Service Bulletin...
Hello,
I've a E1 jam on a FS-3900dn printer.
Changed the fusing but after a few 100 prints the jam came back.
I've found this in the manual;E1: The length of paper is shorter than designated...
Hello,
Fax is already removed.
I think also it's the OP pwb.
I swapped the OP to another machine and the same problem.
The dimm is not the problem.
I swapped it also and works perfect.
Hello,
I've done a downgrade from FW 15 to FW 13.
After that is got a boot welcome screen, can't pass it at all!
Tried boot switch with 256MB CF card with FW in root without succes.
FW update...
Hello,
Is it possible to remove this dual scan function and use the machine without the CIS?
I guess i have to remove the connection board on the main pwb where the black CIS cable is connected...
Hello,
machine has latest f/w.
The problem was a driver they used from A Ricoh for a Kyocera printer!
they installed a few weeks ago this kyocera printer (before this ricoh) and used the same...
I had the same issue on a Ecosys P2135DN.
F24B not F248!
I'll go back tomorrow.
I'll try to connect the printer with a LAN cable direct to the computer of the client.
I guess network or main...
Hello,
I have the same sqeaking noise with a Ecosys M3540DN printer.
The noise is not always, most of all it happens after a few hundred prints and then go's away by itself.
I've changed the...