im in the same boat here ,
anyone kind enough to provide the new link ? ,
thanks
Type: Posts; User: patrcass
im in the same boat here ,
anyone kind enough to provide the new link ? ,
thanks
hi venom,
what toner add mode are you talking about?
thanks
hi there,
anyone having problems after fitting the modified black dev unit with fading black solid after about 10k
on them. seen it a on a few modified 250ci s now . firmware version is at v13 ...
remove the plastic sensor pockets inside neck of the waste toner bottle with a long nose pliers ,then clean inside the neck with a cloth so the sensor will see a clean neck. they are detachable and...
its 06141010
,hi
just wondering about this new range of colour.are they more reliable than the 250,400,500ci series,toner life as expected , any premature failing mkall parts etc,
how would you compare it to a...
hi all,
just wondering about this new range of colour.are they more reliable than the 250,400,500ci series,toner life as expected , any premature failing mk parts etc,
how would you compare it to...
thanks for the reply,
i have talked with 2 other dealers this week .both are reporting the same problem. one utax dealer has contacted utax this week and just got fobed off.
interestingly he told...
hi all,
anyone having tk6305 toner giving poor yields of around 18k consistently. i have a good lot of these out in the field and they all are showing poor yields of 18k to 22k at best. these...
thanks for replies all.
toner levels can be stuck on 10% ,particulary black and will call for toner . we ve been asking some customers to keep hold of the cartridges so we can inspect them for...
hi eric ,
have seen this bulletin before and can confirm that the toner cartridges have the modified gear attached
hi all,
having an ongoing problem with 250ci range were the toner cartridges are not fully emptying while machine is calling for toner. In most cases there is 10 to 20% toner left. When the...