This is an ancient thread. Ended up sending the machine back to Sharp and getting a new one. Still was a pain in the ass. Put a new DC PWB and it still cooked the fuser rollers. Not sure, never...
Type: Posts; User: skookumchuck
This is an ancient thread. Ended up sending the machine back to Sharp and getting a new one. Still was a pain in the ass. Put a new DC PWB and it still cooked the fuser rollers. Not sure, never...
Hey, Thanks guys. I think that I remember the electrode covers while scanning some of the bulletins years back. Be cool if I could transfer you guys a cold refreshing beverage of your choice!;)
Immediately after color pm we started having issues with the cyan and yellow colors. Everything with those colors washed out. After fooling with it for an afternoon I put in just a single color,...
After hours and days of jumping through Sharp hoops, with great reluctance, they suggested changing the SD and/or the CF cards. Apparently it was a bad SD card. Something else that came up while...
I have an MX-M654 with a blank display screen and the green LED always blinking. I have a bulletin regarding blank display screen with "all other functions normal" and have checked items in that...
I did a ridealong many years ago with a Sweda tech in Seattle. His back seat was piled to the bottom of the windows with trash. Looked like he never missed a chance to drive through a fast food...
I have seen literally that many staples INSIDE a document feeder. Some were hanging on the wires above the circuit board inside. The result of hundreds or thousands of stapled packets through it.
Good idea on the custom mylar tool. I use business cards.
Unless you get 10,000 of them for $10.00 ea and send them to China or Vietnam for rebuild it just doesn't make any sense. We get them through the Sharp QPA parts program and the difference between...
We found that the MX-B201D does not support SSL.
This machine does not seem to have an "Enable SSL" box to check for setting up email. All other machines in our company system have that. I have tried with our local network as well as Google. I...
The bearings in the LSU motors are mostly air bearings and don't require lubrication. However, I have seen posts on other sites that say they have had some success, at least temporarily, with a tiny...
I started using a 3M vac in 1980 on actual 3M copiers. The 3M VQCIII was a cold pressure fusing treated paper machine. I think it was actually made by Mita. The company I worked for had paper...
Alaska Airlines used to allow customers to bring their rifles on board to help avoid damaging the scope prior to going hunting. Things have changed haven't they.
Try Greater Philadelphia Equipment Co Newportville, PA 19056. Phone: 215 788 7111 email at gpec1@verizon.net They deal in all kinds of copier option units. I have used them once or twice in the...
Great troubleshooting description!
Not that I know of. Unless you are a dealer the only other places are Precision Roller (set up as a real service company you get a discount), Carolina Wholesale maybe? Oh yeah, Olson Brothers are...
I always just replace the laser unit after getting just the laser board and finding that was not the problem.
These machines can have one of two data security kits. One is for the government and military. The machine is not reusable as far as I know with the government kit. The other kit is for commercial...
Is there more than one dip switch on that board? If so, witch one is it?
Try unplugging the machine from the network if you have it set up that way. If it stops then you know it is a freaky print job probably from the internet.
You might try Hytec board repair. If they handle these they might have one on the shelf for swap. I think they handle all board repair in US for Sharp. I've used them a couple times in the distant...
Hey, Just did a repair on this. I have been able to fix it with replacing the rollers on the shaft with the two gray belts on it. It's really fun, I would recommend a good picture before taking...
I was one of first customers for the download side of the company. I called him and he made it right instantly. Made several purchases after that. I thought it was a great service.