You are correct....but this machine is exhibiting issues on certain modes only.
I am fairly certain that there is no special operation for the LED operation for copy vs print
Type: Posts; User: Synaux
You are correct....but this machine is exhibiting issues on certain modes only.
I am fairly certain that there is no special operation for the LED operation for copy vs print
I can only think of fooling with PDF/A-1a and PDF/A-1b; however they are both based on 1.4; however, PDF/A-2 is v1.7 based (but to my knowledge not supported).
What type of ancient software are...
As noted, that does not look "digital" to my eye, but I would run the i/o checks in SM just in case.
Do you have a microscope? If not, use the highest power magnifier and see if there are any...
Did you ever resolve this?
Just kidding!!
I actually just had this issue but I was confident it was PSU related. After a quick visual inspection, I thought to myself "I remember reading about...
I cannot recall ever seeing an NG for this.
The Service Manual is sufficiently vague on the subject so not sure what to do about it.
Machine operates fine, I decided to do all the I/O checks on a...
Well next time you are there, go into SM and take a look at the temp/humidity readings ;)
First I would try to "print as PDF" which will create another .pdf somewhere on the computer. If the € symbol shows then it is likely the PDF program they are using or a corrupted PDF from the...
What is a burnt mark?
Upload photo/scan of the issue.
Hmmmm, just for fun:
If you do not install the "movie data" perhaps cinéphobic or cinephile (irony).
For those without HDDs perhaps heedless-one, absent-minded, oblivious, et cetera
Now, this...
Unless someone says something I am going to cancel the order.
I don't necessarily disagree, but I finally got my phone to cooperate. It is a little difficult to tell but that area is recessed from the platen. *edit* the white strip/guide was originally on that...
I feel somewhat silly asking this but what is the purpose of this guide?
58679 it is the white strip on the bottom of the ADF with a foam backing.
(For some reason I cannot upload a photo.)
I...
Yes. Additionally, in my experience, the "bearing" on the black cleaning roller degrades over time and tends to cause the shaft for the roller itself to get a gouge in it rendering nearly worthless...
I was going to post my fix of the toner drive section repairs just for fun as these machines are all but extinct. However, my last pair of drive units cannot be fixed with my JB Weld method as the...
I got mine for the 4 series on Alibaba. I only did this for a few fusers as I typically try my best to convince everyone to stage any larger machines away from the workspace when possible.
You can...
USA (texas)
You know what, that occurred to me when I was writing that, got a phone call and forgot! :rolleyes:
Got a source?
Easy to find, but I have had concerns regarding quality
Those bulletins are quite interesting and it even seems like KM finally got some gooderish engrish writers. Which brings me to the subject of "All Active Solutions" I am pretty sure my 5-6 year old...
I am 99.9% pretty-kinda-sure the tool works in win7.
USB CF card readers are still around and he might still be able to find these somewhere (only card I know works--DO NOT format!):
53927
The...
I rarely need to order non-OEM, some of those companies I was unaware of, thx.
Trust me, I know the problems with aftermarket toners.
That crap precision roller sells will not work for any...
This is long overdue, but they wont do it.
Basic corporate bs will not allow it.
I have made several worksheets for compatible toners, but they are for quite old models.
HAHA, steady...
That made my day! ;)
Use your machine to scan in the prints with direction of output!
As stated, probably not the PH if on all 4 colors.
What are the meter counts?
A terrible transfer roller...
TBH the MSDS isn't all that precise... but yeah
And for some reason I never thought about it now, but I never looked at the MSDS for Katun and other aftermarket toners.
I have been seriously...
Hey guys, I really appreciate the thoughtful responses; however, I had gone dun f'd up--but at least I figured it out a while ago...
This business has a 24port switch (cat5) full of connections, I...