Thank you for your time.
Thanged the screws (two of them had a crack) machine is almost perfect just a little nodge on the x axis but the head alignment keeps on failing, even after head purge.
...
Type: Posts; User: ruimestre
Thank you for your time.
Thanged the screws (two of them had a crack) machine is almost perfect just a little nodge on the x axis but the head alignment keeps on failing, even after head purge.
...
Hello
The colorqubes are nightmare!!!...
The first error the black ink on the head timeout, the only way to fix it is by installing a new fru umbilical cable.
Had the same problem about a...
Hello and Thank You for your support
After trying to perform the head purge a couple of times the machine rebooted itself or at least it attempted but now it doesn't pass the startup screen saying...
Hello
; )
(yeah it makes you go mad)
Thank you for your reply.
No i didn't but they purge during the night a couple times a week.
When it happened i made a quick restart and after failing...
Hello
I'm having a headache with two of my colorqube 9201
Ii have changed the screws on the motors that align the heads but when I go to dc971 to perform head to head alignment it fails.
Is...
Thank you Very much.....!!!
I inspected just as the subscription and came to a certain conclusion.
I think that the problem is the umbilical cables they seem to be a bit weary.
I have already...
Hello
My Luck it seems that has run out...
One of my Colorqubes today stopped at a middle of a printing job (map with yellow background), and on the display said that it was heating\warming...
Thank you all for your time and knowledge.
I've bought the LFP here in Europe and it came off a 252.
It should arrive late next week, but I realized "lately" that 240 and 242 are different....
Hello all
I've purchased a Light production finisher from a 242 and it's on it's way, but i realised that maybe it won't be compatible i've been searching thru the manuel of the machine and it...
Yes changed the board with the power suply.!!!
Thank you very much!
Thank you very much
Spot on!!!!!
Hello
Please Help my machine is giving an error 099-394.
What is the Problem?????
Thank you all in advance.
Is there a way to fix it or does a light production finisher of a 252 is compatible.
So how will it be fixed!!!!
Thank you all for sharing!!!
I have on one of my machines a professional finisher on a xerox 560, but i´m going to change if possible to light production finisher from a xerox 260 or 700
does it...
Can anyone help me out i'm on a look out to buy a used square fold trimmer for my xerox machine 560.
Part number JFN-1
Thank you all in advance
Hy had a similar print problem a couple years ago.
My problem was the clutch of the 2nd BTR , it had to be replaced.
But in your case the image is bad on the ibt band so it's not the same...
Thank you
The resolution was by dismantling and cleaning deep the ros (Laser).
Cheers
Rui Mestre
26758267592676026757Hy all.
I would like some advice on your part regarding my xerox 560.
As shown on the pictures below when printing colour or black it makes a shadow around letters in full...
Thank you very much.
Like you said (detective work)!
Opening the high capacity tray on the back (like you said) and putting the machine on and trying to feed the paper i saw two tooth gears...
Thank you all for your quick reply.
The rollers are new with only a couple of months aprox. 3.000 copies
i've tried to watch if anything is unusual or cracked in the feeding area but everything...
Hello
Yesterday one of my machines a dc 240 kept on jamming any kind of paper and format on the high capacity feeder.
All the other trays work fine.
I've already seen if theres any piece of...
Hi
DC12 Very good and old machine... ; )
I had a few of them when that error appears sometimes the solutions where diferent
on my experience.
1- Try to remove the black gear and reinserted...
Hi
had the same problem... : / no way unless required pagepack code from xerox.
the only way I had to resolve was buying toner chips for non metered toner.
cheers
Hi
Any vinyl sheet silver and reflective like a mirror will do.
I'm in Portugal any local Vinil dealer can provide such a film.
But check the sensor positioning of the ibt maybe that's the...
Hi
Similar problem hapened to me a couple years ago on my 250
The Solution was cleaning the sensor of the belt edge learn, on the ibt module, mine had black toner on it (sensor) and the machine...