We took in on trade a Lexmark 748DE printer. As we are not Lexmark dealers we have very little info on these models. I thought if it was working I would take it home for personal use however when...
Type: Posts; User: kyrenecopy
We took in on trade a Lexmark 748DE printer. As we are not Lexmark dealers we have very little info on these models. I thought if it was working I would take it home for personal use however when...
Squirrel!
We have 2 brand new machines, one is a 4500i and the other is a 5551ci. They both exhibit the same problem. When scanning to email, with the scan set to full color all scanned black and white...
I think this is what you need
I haven't worked on Ricoh's for a couple of years but you used to be able to copy it back to a SD card and remove it from the machine. There was a procedure for it in the field service manual. ...
And make sure the acuator is not broke off or bent from heat. Reset the web counter, not the web motor!
the info came right out of the book, didn't see anything about a jumper?
drum heater U339
0=off
1-4=on when in standby
I agree, have used Precision for years (over 20). They do have drums but they are pricy. If you call them up and let them know that you will be doing business with them on a regular basis you may...
go to system menu
adjustment/maintainence
silent mode
ON
and you can try lubing the fuser bushing/bearings with hi temp grease
Good blond joke!
Hmmmm, ok, I would pull control panel apart again and check for poor plug connections or pinched wires, two, I would format the HDD again, and three upload the latest firmware no matter what version...
WHy did you format the HDD? Why did you remove the Control panel? sounds like you need to reflash the firmware
See attachment
error code " S03-2013" belt platen raise/lower error, the BP elevation motor was driven but did not stop in time
and
error code " S35-2083-2" magenta ink supply error, ink detection sensor not...
I have been hearing rumors that RISO is leaving the states or going out of business. I have been unable to confirm this. Anyone got anything?
Actually had that happen to me once!
Received a call one day from a customer that said that OSHA (occupational safety and health administration) had stopped by their office for an inspection and had cut the plug off the copier. Can you...
Don't know if you are using OEM chips or after market but it sounds like the chips are either bad or the wrong ones.
If your machine is hooked to your network you should be able to use Scan to Email
This is real simple; cigarettes are legal. Period. They should be able to advertise them any way they see fit as long as they follow the same rules as any other business that sells products to the...
Me: "Ok, where is my office, my hammock and my paycheck?"
SC611 ADF communication problem, I have had several cables go bad where they are clamped to the machine
SC621 Finisher communication problem, same thing, bad cables
SC955 could be software or...
Yes, they are now up to revision 7 on the fusers. They have also come out with another tool that fits on the jig to make sure you put the jig in correctly. Haven't seen it yet but I am hoping that...
There are so many things that could be causing this problem. You need to update/reload the firmware, change the drum, check connections on BICU, corona could be arcing.
Search this site for SC990...