i have 2 xs658 that does the same. Both where at same location. They do not print to this machine, it is on the network. The bulk of the machines work is faxing and copying. I get the 900.00...
Type: Posts; User: brasilmichaele
i have 2 xs658 that does the same. Both where at same location. They do not print to this machine, it is on the network. The bulk of the machines work is faxing and copying. I get the 900.00...
what is the level of firmware we need
these machines really suck. everyone i have in the field are a nightmare. to clean the sensor if it dont have the little cover and you have to take the OACB out to get to the screws to disassemble...
press Utility, meter, details, then input Stop,0,0, stop 0, 1. then press stop, clear.
i have an issue with the Model of machine, Konica Minolta Bizhub 421/ 501. the machine quits printing. You can ping machine, web into the machine put will not print. Turn off machine and unplug...
clean all the oneway bearings in the LCC feed assy. they sometime slip. good luck
they can squeak in which Konica Milnolta is trying to resolve. it is actually worst on the C451
6k prints, new toner OEM, new fuser we actually had the same issue with the original fuser
there no lines just the solids are not solid and there is a slight blurr. looks like the fuser is not fusing. the print is a little gritty
i did a panick stop on the test page and the black band that is at the top part was in the fuser and part not. the part that was not in the fuser looked alot better.
i have a HP4515 that has bad PCQ. We have put the latest firmware and a new fuser. I panicked stoped a print and the part that went through the fuser was bad but the part that did not looked have way...
change the fuser and the new fuser has a fuse that resets the counter.
C451
have anyone had a c11b2 just what the fix was. thanks
the part number is Z905486200--- DISPLAY 1
would you think noise on line. maybe line voltage issue. keep me posted. Thanks
i have some E01026, E01119, E01500. thanks for the response
make the finisher is docked correctly
could the different fusing temps of the toner/ ink that they have on the pre printed paper
i have a km5050 that keeps giving U01110, u01119, U01140. according to tech support it is a line issue. Customer says they had the line checked and it is good. We put an Muratec MFX1430 and it...
occasionaly the machine looses connectivity with the network. Turn it off and on and it comes on and works fine. help if any info.
you probably to replace the drum as well. the pm cycle is 250K
just take the mailbox off and put it in the Rumpke bin. it is a POJunk.
c
That unit you cannot just buy the drum, it is a whole unit and you can not get them anymore. i have worked on those machine when they new out of the box. sounds like to the...
i would just replace the whole DV unit. It will just happen again. These are really a real work of art, not
to go to tech rep mode you hit utility then meter count(some you have to enter 00000000 in the next step if there is one) then stop 0 stop,0,0,1 then go to counters, then PM counters and clear the...