The way of the CE Password access lock release was changed as follows:
1. [MENU]
2. [COUNTER]
3. [KEYPAD]
4. Stop => 0 => 9 => 3 => 1 =>7
a) Do nothing else at this time.5. Leave the...
Type: Posts; User: repoocynot
The way of the CE Password access lock release was changed as follows:
1. [MENU]
2. [COUNTER]
3. [KEYPAD]
4. Stop => 0 => 9 => 3 => 1 =>7
a) Do nothing else at this time.5. Leave the...
Info
You may find the Airprint option missing when going into network settings.Nothing in the service manual tells you how to turn it on.
This is to do with the function ver.
Setting the FW...
Cant send you a message Allan as it says you have to many stored messages.
If you want to send me a your c.v
Konica Minolta Engineer required for central London.
Salary negotiable for the correct candidate.
Hi,i see that you have already replaced the following parts, drum K, developer K, black developing drive solinde (flapper solenoid),but have you actually checked that either the drum of dev unit is...
Bloody faxes :-)
I take it you have checked the phone line itself with an analogue phone to make sure you can ring out & receive calls ?
That would be my 1st thing to check,also are they using filters in the phone...
All the ones we have setup have been set to GB with no issues.
The only issue we have had is with the various customers network filters & this can be a bit of trial and error getting those to work
On the office365 accounts iv configured it needs a device email address & admin address &a user account the same as the device email address & password
Have you tried formating hard drive in admin mode ?
I seem to get this problem often after updating firmware,usually formating the hard drive through admin mode does the trick.
Also have tried all...
Looking for a Konica Minolta engineer primarily but also to service Samsung MFD's, to cover North London area primarily but also going into London when needs arise.
Company based in Milton Keynes,so...
Had a similar problem,installed a brand new mc into a customer,tried to put it on the network but wouldn't hold the ip address customer wanted,tried pinging mfd straight from laptop with varying...
Been a member for a while but not been active in posting,hope this will change in the near future