Yes have replaced the transfer belt assy but still the same
Type: Posts; User: Reeves
Yes have replaced the transfer belt assy but still the same
Hi Techs am working on a Xerox Dc250 black Magenta and Cyan are coming out Okey except for Yellow its just coming out blank this r the following parts have tried but still yellow is not printing
1....
I got another working fuser unit from another working machine still it's faint on the side and the same fuser unit worked Okey on another machine
Hi I have Xerox V180 with error code 099-375 its something to do with fuser unit help what exactly is coursing this error
559145591455914
Hi everyone I have a Xerox WC 7855 producing faint (light) copies at the bottom and top photocopying and printing even when i make solids pattern prints from daigonositic mode all four colours are...
Help me with the chain code to check the developer motors
345-354
Hi am working on xerox versant 180 displaying error code 042-393 what could be the problem
Thanks
I have a Xerox wc7855 displaying system error. Power off then On and notify system admin the machine is not running dev motors are not rotating only main motor what could be the cause no error code...
What is the nvm
I cleaned the dispenser sensor still its the same problem
Hi I have a Xerox V80 after black toner finished I replaced with a new one it showed 100% it started printing after about 50 copies it stopped with the massage replace toner both showing 0% what...
Hi anyone to share Versant 180 service manual in pdf format
Thanks in advance xtech2011@gmail.com or raychibs@yahoo.com
Share xtech2011@gmail.com
Hi Techs
I have a Xerox Versant 180 give the error code 093-316 the error points to cyan toner dispenser it ll make copies they stop the error is not coming upon switching it on I cleaned the cyan...
We are getting an Error 045-310 frequently in the middle of a print job in Xerox C75 with fiery system machine.
kindly advice for solution.
Regards
Reeves
help me with the component test link
Hi everyone i have a xerox versant 180 giving error code 042-324 the ibt looks okey what could be the problem
Thanks in advance
Took fuser unit to another machine it worked okey which NVM i should reset?744-001?
The fuser came with the machine and it was working okey
310-378
310-380
310-381
310-373
310-371
Hello everyone i have a xerox wc 7855 displaying fuser system error machine was working okey after a paper jam it started displaying remover paper jam I reset the machine now its displaying fuser...
i have a xerox J75 after replacing yellow toner which is at 5% it gave me error code 094-329 i changed to the old toner its displaying cartridge error tried to remove all toners switch off and on...
Hi i have two Xerox machines J75 when I load paper on the Dadf the green light ll come on the the document lift ll go up but when I make a copy it ll scan on the platen it won't pick from the Dadf...