try to reinsert SDRAM's, systems memory, page memory, nvm memory
Type: Posts; User: tech_c3
try to reinsert SDRAM's, systems memory, page memory, nvm memory
clean the ibt cleaner and check the rotation of ibt motor by component control code (output check).
either one of the developer not seated properly that will disrupt the rotation of ibt belt. or the ibt cleaner is clogged.
the sensitivity of ohp sensor, near registration sensor, is to high, just block the ohp sensor with bit of paper for temporary solution.
replace ohp sensor if you have spare.
do you hire tech from philippines?
i need firmware for samsung scx4521F.
can you share it with me folks.
thnks:o
new developer has new atc sensor. try to adjust the atc sensitivity using the three digits mark on atc sensor itself. use pws.
it might be running out of particular toner. isolate by prinitng cmyk.
thanks to all your posts.
srewtape is right, to enter service mode in irC3200: additional function key, 2&8, additional function key.
try to test print internal pattern to isolate problem.
if test print is with same problem, you have to concentrate
on xerographic process either on drum, developer, ibt or fuser.
Thanks,
But I could not enter to service mode * 2 8 *.
What are the other ways in entering to service mode?
just want to ask on how to disable the reader unit since machine arrived without communication cable between reader and printer. we want to test the printer if it is ok. thnks
refer to sm in removing the ROS. clean the window with lint free cloth.:)
:) try to clean the ROS window.
having problem with konica minolta 7045, folded copy. at first power on in the morning, paper transportation is normal but as more copies being made the pre registration motor rotates so fast that...
pour small amount of toner on the surface of drum having adhesive then wipe gently not to scratch the drum.
probably the difference is the individual crum data, can't be interchangeable.
clean the dev yellow, check the value of atc sensor yellow and try to adjust using maintenance/diagnostic for atc sensor adjusment.
i'm from philippines but married. do i have a chance, i worked as xerox customer engineer handling latest digital equipment like DC5065, DCC5400 and etc.
i need sm and service program for epson tx100.
willing to swap, i have lots of sm for samsung and xerox.
pls give me your email address.
vivace 340 chips are resettable. i have available chips for this model.
can you picture out the toner chips what it looks like?
email me at clas1967@gmail.com
pls. check your email.
do you have sharp sf2114 sm?
pls. give me your email address.