Looking for a copier tech for Mid-Michigan Lansing area, main brands we work on are Kyocera and Lexmark, willing to train. Please send your resumes Ktucker@getaos.com
Type: Posts; User: ktucker
Looking for a copier tech for Mid-Michigan Lansing area, main brands we work on are Kyocera and Lexmark, willing to train. Please send your resumes Ktucker@getaos.com
i have seen the 0523 issue (paper out in try 3 but still try's to feed)in the 4 series Kyocera , replacing the bridge seems to resolve the issue. although i can't find anything wrong with the old...
Kyocera Lexmark sharp Dealer in Michigan is looking for a Field Service Tech for the Lansing-Jackson Area
Company Car and Phone Provided .
Please send your resume to
ktucker@getaos.com
has anyone had a issue with no power the the Radf Motor not working
we have replaced the motor .
the clutch and solenoid fire in test mode .
voltage read 5 and 7 volts
we replaced the main...
We have a TA 4053 setup with a ITC coin op
the customer wants Free scans .
has anyone seen a way to allow scanning from the panel without inserting coins.
the Sharp Boxes did not restrict scanning...
did you find the fix ?
I have one doing the same thing
new PE firmware to fix this issue
did you find solution to this issue
looks to be a issue with the position of the tray guides when the paper is loaded in the tray
We are having the same issue
please let me know is you have a fix
that worked thanks
we are seeing the same issues with our high volume boxes. pms are done on time
I have a mx-m623 with mx-fr22u data security
that the customer has lost the admin password.
how do I reset the admin password?
any ideas
Thanks Ken
check paper type
if its set to heavy it will not saddle stitch
did you find a answer ?
I have a 237 with the same issue
is it stuck in the Samsung screen?
if so replace op panel
FSFS_S
I have a MX-6240 with FN20 when running a large 11x17 4 page saddle job (on hammermill 28lb)
it start to miss count the sets and jam at random
(I have seen it fold and exit one page during the run...
30803
the roller is in the bottom of the finisher at the saddle exit tray
you can remove the tape that covers the hole and open exit door with a pair of pliers
I removed the rubber tire
cut a...
I modifiyed the crescent rollers
in the lower exit part of the finisher
by removing the rubber tire and adding a flapper ,
no problems yet
it seems to be a paper issue
I will post pics and...
did you find a fix?
I have one doing the same thing
the sharp hotline told me to adjust saddle rollers
I cant find the adjustment
Yes (is not just me)that pic looks the same as mine and then the toner dusting builds up on the back of the belt and rollers,
we have the new flash and do a full calibration , i have seen the lines...
I have four MX5111n machines that are toner dusting so bad after 60k color(cust running 60-80 color a month) that it is getting behind the primary transfer belt, thay all have the new dv covers. No...