Search:

Broken Primary wire shorted to something internal and zapped DC controller Had to reset DC controller after replacing the Primary Wire

In middle of the run the copier started making blank prints .It was during a large booklet run. The pages went blank instantly no initial fade or PCQ. No noise or errors displayed , Both copy and...

No this would be for a 7095-7105 etc

https://www.copytechnet.com/forums/attachment.php?attachmentid=43693&d=1569878870&thumb=1&stc=143693 Looking for alternate # to FF5-8202-000 item 52 Thanks

Thanks. Do you also have part # for the fuser separate claws

Is there a FUSER QA KIT from canon for these machines? Part # ?

Yes power coeds are ok

I have a machine that will has a E0009 code as long as i keep the fnt door open other wise as soon as i shut the door the machine CB on back will trip. i reset the connectors for the decurler...

Hello out there anyone have the part # for PS 35 and PS 52 i have the flag broke on these sensors Thanks

No duplexer

Had a guy break a sensor flag i have the part # for sensor WG8-5848 are the flags for those sensors all different ? do you get a flag with the sensor ? im thinking sensor PS24-PS34-PS32 one of...

:)

is it same part #s for both size decks?

Thanks a bunch

Hey guys i need the Part #s for the cables that drive the paper lift plate on the Canon Paper Deck X1 its the large deck that holds 11X17 on the IR 7105 etc.

Hey guys i need the part #s for the cables that Drives the paper lift tray up and down on the the Large Capacity Tray X1 its the large tray that holds 11X17 on the IR7105 Thanks

Development unit seems fine the solids are really good like when doing test pattern 10 it looks good and solid fnt to back the issue is on gray scales

Or is it 5 either way solids...

Development unit seems fine the solids are really good like when doing test pattern 10 it looks good and solid fnt to back the issue is on gray scales

OK I will try that I'm printing out using test patter 5 I just don't understand how moving the prime wire alot does not seem to make a difference on the prints

Went to a machine with light copies from half way to back with black only. The drum and dev were way over on counts. Replaced drum ,dev,wire,grid, I am still getting light prints . What I don't...

I am looking for the part # for the front door and long panel on the buffer assembly on a IRC Advanced 7065 Thanks

I have a IR 7105 that won't let me select hole punch because I believe the hole punch waste sensor is bad. Does any have part # for the sensor ? Thanks

get a patone color chart then print test page if colors match then it has to do with the calibration of their screen not printer

Thanks I need updated part #s for 2 items FH7-5836-020 and FB2-7728-000

That looks like your transfer/sep corona cleaner is not at home.