When you send a print job to the printer, it remains asleep until you press any key to turn it back on for printing.
I cannot disable sleep mode, and the default setting is 1 minute.
I would...
Type: Posts; User: brunot
When you send a print job to the printer, it remains asleep until you press any key to turn it back on for printing.
I cannot disable sleep mode, and the default setting is 1 minute.
I would...
Noted with thanks
Hello everyone,
I have a Kyocera Ecosys M6635cidn multi-function printer and scanner. It was working fine. The customer has upgraded to Windows 11, and now whenever it wakes up from sleeping, it...
Hello everyone,
I have a Kyocera Ecosys M6635cidn multi-function printer and scanner. It was working fine. The customer has upgraded to Windows 11, and now whenever it wakes up from sleeping, it...
Hi,
Is it possible to set a default fax dial prefix on the Kyocera Taskalfa 2554ci?
Thanks.
Tried heavier paper cardstock A4 or A3 (250g) tested ok in any cassette unit but with plain paper A4 or A3 (80g) same issue.
Hi, performed right exit test, paper A4 plain 80g (in any cassette unit) tested ok
On the device, have you tried to access the network settings with Login:3500 and password:3500
Hi everyone,
After the installation (new machine), the print quality is okay, but on the edge of the printouts there's something weird (Please check the link below); only the cassette unit 5...
Hello everyone,
The toner is not fusing to the paper. It flakes or rubs off the page.
The customer is using A4 paper 160gsm (preprinted) and I've verified that the media (paper/card) used...
I've followed your instructions regarding U467 and the machine is working properly.
Thank you, much appreciated.
54698
Well noted, thanks.
I will first try the U467 on Monday morning and will let you know...
Thanks!
I've performed the Laser cleaning (Adjustment & Maintenance Mode): same issue
I think I need to dismantle and check the Laser unit.
Thanks
Hello everybody,
White strips appears only on color image.
54647
Please advise.
Thanks
On the datasheet of Kyocera TA 3212i and other Kyocera TASKalfa series, it’s written Standard interface: USB 2.0 (Hi-Speed) and 4 x USB Host Interface, can someone show me the 4 x USB Host on the...
Hi,
I've performed the steps (destruction of stored JOBS in HDD) and now the machine is working properly.
Thank you, much appreciated.
Hi,
The machine (Kyocera Taskalfa 6002i) shows error F460 at startup.
Has anyone faced this problem?
Thank you, much appreciated.
Dear all,
Thank you for your support.
You are right mita, I've adjusted the spring (drive coupler) at the back, all test performed, Yellow color is OK now!.
Best regards,
Bruno
Thank you for all your support.
You are right mita, i've adjusted the spring at the back (engaging the unit), all test performed, yellow color is OK!
Best regards,
Bruno
I did not notice the little white button but saw only the release button to remove the unit.
Thank you for your prompt reply.
Yes, Yellow was there before replacing the drum unit.
Hi, can you please assist the following issue:
Yellow color is missing on the status after the drum unit remplacement.
Please check attached file.
Thanks