Search:

Hi,

I have 3 hp Laserjet p4014dn printers. I got hold of them in unknown condition and it turned out they were giving a fuser error whenever they tried to print. I purchased a reconditined fuser,...

I inspected the toner cartridge and there was a great big piece of fluff on it. I cleaned it off and tested again. It seems to be working fine now. Thanks all for your suggestions.

Hi Prntrfxr,

Great suggestion. I swapped the yellow for another toner from another printer and it worked fine. So it is the toner. It is virtually brand new this toner. do you think its fixable or...

Hi,

I'm trying to work out why this 4700 has one band of white about 9mm wide right across the page (when i print a yellow page). It is definitely the Yellow toner affected.

the band is...

Hi,

I have a Toshiba ES 4511 with a CEF0 error which according to the manual is a revolver motor abnormality.

Any ideas how to fix this or is it boat anchor time for this printer?

Thanks,
...

Hi

ES4511, both colour and black and white prints fade to almost unreadable towards the bottom of the page. Any idea what can cause this and how I might fix it?

The top 2/3 of the page are ok,...

Hi BR,

Where are those settings?

Thanks,

Jason

Hi,

I have a Toshiba 4511 with fax card. When i do a fax test using Telstra, the report says that the Transmit Level is 4.4dB too low.

How can I adjust it?

Thanks,

Jason

Hi Oronoco, and all the other people who replied to my questions,

I managed to locate the sensor and clean it with your guidance.

Thanks very much. I really appreciate it.

Jason

The instruction sent to me says to remove the "maintenance tray" however the service manual that I have, makes no reference to a maintenance tray. It does however have a procedure to remove the...

what are the Toshiba mods? where are the documented?

Thanks,

Jason

Thanks friend!

I'll have a look on Monday. Is it hard to get at that sensor?

Jason

Hi Guys,

I have a Toshiba 4511. It has this error message that says "Check the color toner cartridge" on the scree. None of the buttons do anything.

This error happened after adding a new cyan...

Hi Guys,

Is it possible to print onto DL size envelopes on the 4511? if so, how do you do it?

Thanks,

Jason

Thanks! Worked perfectly.

Jason

Hi,

My Toshiba 4511 appears to be sending out Counter Notification emails to the previous owners of the machine. Where can i change or dissable the counter notification email addresses? I looked...

Hi Atudorica,

any idea if it will it take a larger 256 or 512 meg sdram module? or does it only accept 128s?

128 meg simms seem harder to come by these days

Thanks,

Jason

Hi,

I am finding printing to the Toshiba 4511 quite slow. I have installed the printer via the SMB network share it provides.

Is there any way to speed it up? Maybe if i set up a network port...

I read that you can add more ram to the toshiba 4511 to be able to print in 1200x600 resoultion.

Any idea what sort of ram the toshiba takes and where you put it into the machine? Is it standard...

Hi,

I have a Toshiba estudio 4511, it gives this loud beeping sound for a few seconds every time it switches to energy saver mode. (at least I think thats when it happens)

Is there any way to...

Thanks guys.

Jason

Hi,

I have a Toshiba e-studio 4511. It gets an error from time to time, CEB0.

Can someone tell me what that means? Or point me to a list of error codes?

Thanks,

Jason

Hi,

Can someone please send me the latest firmware for the 4511?

pm me for my email address.

Thanks,

Jason