i have konica minolta c554. when i turned on the machine there is no action until i close the front door then the machine starts up, but there's no energy on the screen.
how can i fix this problem
Type: Posts; User: karimharaka
i have konica minolta c554. when i turned on the machine there is no action until i close the front door then the machine starts up, but there's no energy on the screen.
how can i fix this problem
hi i have konica minolta c652 is not energized. i turn on the machine but no light at all. how can i fix this problem and where can i find the fuse of the power supply to change it.
please your help
i have another imagine unit which works will in other bizhubc652.
could someone send me firmware of bizhub c652 because i changed the main controler board PROBLEM C164
karimharaka@gmail.com
...
i have konica minolta c452 which print dust. i have changed the laser bloc, transfert belt, controller board. imagine unit. all of these are not worked. ( i still do not replaced the graphique...
i am so sorry if i made you angry, i would just to be kind with i did not know that the word 'Dear' will hurt you, beacause we learn to use it when we write a formal and polite msg. any way i will...
Hi Dear, I have changed the developer and the opc drum but the priblem still the same!!! i reset the opc drum ext....but nothing solve the problem
Hello, a foggy background on the on the second face of paper the first side is good but the second side is bad i changed the wires but the same problem, but when i remove the middle wire the copy...
because the machine would not started until i changed the NVRAM
Hello sir,
i would like to inform you that i had changed the nvram in order to give you more information about the problem
so knwo what are the instructions should i follow to solve this problem?
thank you for your reply. i have changed the NVRAM how can i programe it again ?
Hello,
i need help pleas, i have a c451 konica minolta it s work well but when i make a phoyocopie ftom the scanner direct it print a small squares on the paper i tried many solutions but nothing...