Search:

I use the AF030094, 1094 and 2094 in all machines from the MP C3500 all the way to current. If it fits, it ships. Less parts to remember and carry.

This, had the same issue. Rebuilt ITB cleaning unit then replaced with new. I then realized all the rollers and belt in the ITB were past life. Did a complete overhaul for the unit and problem...

The IM C530B is Lexmark as well according to the training I did.

2 factor authentication and setting up an APP password works great. Have been doing this for over a year.

It's a Lexmark. I did a half @$$ online training for it months ago. It's a joke of a machine, you have to do the training and then they give you a Lexmark login.

This. It is a feature of all the IM series units, if it doesn't detect a dial tone every so often it will throw a line error. It can be disabled in user tools.

I use the D150 sleeve across the board, all the other parts are interchangeable like mga has said. I even had a rebuilt 45/55PPM unit that I put in a 3003 a while back, just swapped out the bottom...

This is where we typically get it. Their tech support for board issues is top notch too. I call them when I have circuit board issues.


Sent from my LM-V405 using Tapatalk

The black and color are interchangeable but the black does have a larger lube bar and will last longer. And the 03 and 04 are interchangeable as well. The 04 are typically cheaper. That said they are...

This. If it says cartridge not recognized then it's a bottle/chip reader issue. If it tries to add toner and the add toner never goes away it most likely is a bad toner pump. They are known to fail,...

Yes I have added and removed fiery units many times. Remove the unit and nic card, turn the 2 bit switches back to default, reboot and good to go.

Sent from my LM-V405 using Tapatalk

Did you remove the fiery NIC card from the copier controller? The native print function will not work with that NIC installed. Scan and other functions will still work. I learned this the hard way. ...

Yes. Meter reads, and native scan (ie using the native scanner screen and not fiery scan). Printer, the Fiery "replaces" the embedded print controller so to speak. You can disable the fiery in SP and...

The native printer and fiery cannot co exist. You can enable native (GW) scanning but print will fail. Also the Fiery gigabit card has to be removed and the above sp programs switched. The error is...

In the USA the 6502 is a 120v machine and the 8002 a 208 volt. Definitely the heater unit is different off the top of my head due to the voltage difference....

Sent from my LM-V405 using Tapatalk

No better than the previous SP5300 (MP501). Have lots of pharmacies that print thousands of pages a week on them and the Fuser units fail at 1/4 life and are a royal pain to replace. At least the MP...

The MP 501 is a Kyocera engine with a Ricoh controller and op panel. I agree, they are a different beast. The MP 401/402 is a little chintzy and a replacement for the MP 301. The P501 is a printer...

D1446091 is the one I use for all the color 30-55 ppm from the 02 series back to the 3000/4500 series (B223/230).

Sent from my LM-V405 using Tapatalk

I concur. I interchange the sleeves and pressure rollers all the time...

Sent from my LM-V405 using Tapatalk

This. Happened to me more than once.

Sent from my LM-V405 using Tapatalk

Truth. Not my favorite. The consumables are very difficult to change (Fuser, pcu, dev unit) and they do not last anywhere near their rated life. And the controller board requires a contortionist to...

I always put screws in the fence so I can't move anymore. The holes are already there. If they need to feed any other size there is always the bypass tray.

Sent from my LM-V405 using Tapatalk

Truth. Rebadged Kyocera piece of junk....

Sent from my LM-V405 using Tapatalk

I do it all the time. I usually carry the black one as it has the larger lube bar. D1862218 vs D1862219

Sent from my LM-V405 using Tapatalk

They all interchange. I use the black in the color slot all the time, the black just has a larger lube bar.. The 04 unit is indeed cheaper. The dev units are naturally unique

Sent from my LM-V405...