I have a customer with a jam I am trying to help him clear over the phone. I remoted into the printers web interface and checked the event log and he is getting a 101.00.00.01.01 jam. The service...
Type: Posts; User: shamgar1981
I have a customer with a jam I am trying to help him clear over the phone. I remoted into the printers web interface and checked the event log and he is getting a 101.00.00.01.01 jam. The service...
Sorry misread your original post, since it’s from both I would suspect the ccd right?
Sent from my iPhone using Tapatalk
Is this with the flatbed, the document feeder, or both?
Sent from my iPhone using Tapatalk
What’s the OS you are printing from and have you tried sending the pdf directly to the printer (usb key or command line) instead of through the driver?
Sent from my iPhone using Tapatalk
I’ve had the opposite issue for years, try looking for a setting on the printer web interface called “Auto Cassette Change” and make sure it’s turned on in your case (warning, with this on it will...
I'm using EC_P6021cdn-P6026cdnENSMR3.pdf and the repeating defects gauge is in the Appendixes in the back of manual.
so I have a P6026 I am working on with a cyan haze going down the right side of the page. its mostly indistinct, but there are a few marks I can see that are clearly repeating at 97mm.
...
so I have a P6026 I am working on with a cyan haze going down the right side of the page. its mostly indistinct, but there are a few marks I can see that are clearly repeating at 97mm.
...
Also check the transfer roller, a little dry graphite powder seems to lubricate it good
Sent from my iPhone using Tapatalk
Well in the 4200 I’ve found lots of squeaks from the little back plastic rollers on the rear door (6 of them in all) a tiny (very tiny) drop of oil were they touch the metal axel seems to take care...
all black then?
was that with the document feeder, the flat bed, or both? any difference when you copy via the flat bed or document feeder?
How does it scan to file?
Sent from my iPhone using Tapatalk
Do they print a lot of labels?
I work with all pharmacy printers, I’ve seen several times when they use cheep labels were their is build up on the white plastic guides right before the paper...
I know about elog, stat, and stat1 but I'm note sure I've seen the "page;" one. I'll test it in a little bit but for posterity, what does it do?
The /svcmntrpt is newer and doesn’t work on the FS-4020s I’m used to working on but the /eventlog does and still works on the P-3055s we are selling now.
Sent from my iPhone using Tapatalk
Black cat, I hope you kept a copy. Lol, I was hoping you would contribute.
Sent from my iPhone using Tapatalk
Sigh, the difficulty’s of being the one printer tech in a small tech company, convincing my supervisors that implementing KFS large scale is worth it. Especially when we still have a large amount of...
No, thankfully I’ve know about that for many years now. But give that the company I work for provides the full computer system and I can remote into the local network this type of thing gives me a...
Lees, are their any other web interface tricks you know of for kyocera? this is the first I heard about the "ip address/eventlog" and I am Blessing and Cursing Kyocera in the same breath over it now...
I've run into a few things on this forum that have been extremely helpful and I'm wondering if there are any others that I am missing. I'm the lone printer tech at my company and I am mostly self...
wow, i've been looking for something like this for awhile now, any other little secrets they are hiding in the web interface we should know about?
I wish it were that easy with the Kyocera 4200's when they start making noise.
Don't talk to me about labels, I'm the sole printer tech at a company that does full computer systems just for Pharmacies. You know, the ones that print labels to go on all your pill bottles. You...
All set then Black cat? I was going to offer you a few off a parts printer I have, only about 45 min north of you.
Your welcome John, I got a big smile when I read your comment, knowing something I contributed helped someone else!