One other thing to consider, is your fax line also your DSL/Internet line. If so you will need one of those DSL filters on the fax line to the machine. The beeping your hearing may be the DSL signal.
Type: Posts; User: monbat
One other thing to consider, is your fax line also your DSL/Internet line. If so you will need one of those DSL filters on the fax line to the machine. The beeping your hearing may be the DSL signal.
You will need a new HDD and to have the Firmware reloaded for th machine to work.
Unfortunatley there is no way to adjust the temperature settings ( or any settings) on those machines. You can try a memory clear ( Samsung fix all) or a new Fuser. Is it giving any error messages?...
Thanks all for you posts, it was a lot of help. I got them both running. I ended up using an old laptop with an older version of SST and the new HDD file. Thanks again.
Thnaks for the replies. The HDD's are Toshiba but I'm not sure of the model number. The place they were ordered from listed them as specifcally for the iR2200. I will try the irt v18.
Hello all,
I am having trouble reloading software on two iR2200's. these machine had their HDD's removed by someone else and the customer wanted to get them going again. I installed the new...
You can try opening the cover and removing the the toner then resetting it. i"ve seen this message appear after a memory clear or NVRAM reset.
This code is a Com error between the GW board and the Control panel. Check the connections. Worst case is you'll have to reloade Frimware.
If you haven't emptied the "Recycle bin" you may still be able to restore the deleted file.
The CB6 is an eror with the shift motor. Check the path for the Staple unit and make sure the unit hasn't slipped off track.
Yes, you can send an email outside your network. On their EXCHANGE server, you will need to set the account the machine is using to relay.
08-600 set to 0 to disable department codes.
You may have a bad System board then. Have you tried connecting your laptop directly to the machine?
You may have either a bad ethernet port or the NIC portion of the System board is bad. You can try to re-intialize the NIC with 08-693. This will reset the network settings to factory defaults. Hope...
If you don't already have a printer set up for the machine, you'll need to use the "Add Printer Wizard" to set up the print driver. Select the Local option and create a TCP/IP port with the machines...
Hold down the 1 and * while turning power on. The screen that comes up should say "TEST MODE CL". key in 100 and press "START". When the screen returns to CL you can power the copier ON/OFF.
Yes I did, but I did not seen where to enable SSL authentication. I was able to change the port # but it still failed to sent thru the gmail SMTP server.
How workstations are on the network that are printing using the LPR port? I believe the limit is ten otherwise you can have problems. Also is this a server/client network with a domain or just a...
Hello,
Did you intialize the fax board when you installed it in the new machine?
[1] [Q] [POWER] n [100] n [START] (It takes about 20 seconds for the digital keys to be operable after
the...
When you get on site check the enabler for the machine. With the machine turned off remove the cover and look for the enabler part number, it should read GM-1020 for PRINT kit or GM-2020 for...
Look on the right side rear of the machine, is there an Enabler under an cover there? It should look like a USB jump drive. If its not there then you won't be able to Print/Scan. Even without the...
Are there any error codes on the machine or in history(08-253)? Have you checked to Transfer/Sep assembly to make sure it is making good contact in the back? Another thing you can try is print out...
Hello all,
I am trying to set up scan to email using a gmail account. my question is will this machine support SSL authentication? Is there another option to use for scanning, the machine has...
I have seen this problem also. What it turn out to be was the Reg motor going bad. If you remve the right rear cover and DV fan filter unit you can watch the motor/reg roller run using the 03 codes....
Hello All,
I am trying to set up the DP3030 for print and scan. I've set a static IP and configured the rest of the network settings. I can ping the static IP, but when I load the driver it can...