Search:

I have a couple.

Just got a new (to me) car issued to me. Great stereo, AC the works!
And like most techs, I have a couple totes in the back where the hatch (Boot) opens up.
Well, first or...

Black and White deviation?
Color Deviation?
Which color/s are off?
Use magenta as your standard when comparing.
I'll pm you some other information.
Bill

PS, did you put in a new cleaning...

Not to be an ass, but there are not just two verses to The Star Spangled Banner. (There are four.)

O say can you see by the dawn's early light,
What so proudly we hailed at the twilight's last...

You have two paths.

One, bite the bullet, use a manual and tear it apart. You may be able to clean those clutches with alcohol into them and spinning them.

Two, tell the customer you will be...

Recent operating systems in 32 or 64 bit architecture require different coding to gain access to the copier. Old technology just wont work with the new sometimes. The HP universal driver may work,...

What level is the firmware at right now? The latest firmware is SYS 4006.
So check what level your firmware is at first. Then worry about updating it if you need to.
Your going to have to bite...

Get it to jam and leave the paper jammed in the fuser, remove the fuser from the copier and start looking to see what it is hanging up on.
If it is fan folding as it enters the fuser, then look on...

Sounds like the hard-drive is full. I recommend getting a handbook from Paul at Just Manuals so you can reformat the hard drive. Another issue I also found was the thermistors had enough build up on...

Do NOT try to swap more than one board at a time or you WILL put the machine into a state that only a Toshiba technician can undo. This has to do with the counterfeiting protection built into the...

This is the first or original number 6LE23638000
Then a revision was released 6LE39052000
And the latest revised one is 6LE23638000

So, when ordering use 6LE23638000

PS, your number is...

My company has replaced all the sensors in 3018's due to a bad batch of them making it into the market. Only way to really kill the issue is to replace them.
PM me if you still need some help.
Bill

Attempting to bypass a free trial period is considered theft and punishable by the law. If your doing this for a customer, then your subjecting them to possible lawsuit and voiding their warranty if...

Hi All,
first, I did use the search function! Really! I did! lol
But quick question, is there a means to force a mx2300n back to factory defaults? I had a customer get in the machine and make...

Thanks!
I look forward to making some new friends etc here. :p
Bill

Hello all!
New to these forums and just wanted to say hi.
I have been in IT since the early 1980's and working on copier technology since 2006.
I went to a technical school for electronic repair...