Mc-3100 needs to be replaced
Type: Posts; User: marvin_PL
Mc-3100 needs to be replaced
Turn on the cassette heater, it's on the back of machine near power cord,under plastic black cover
Can I check this in u150?
Leave the driver from 224 so user won't print on color. Next set b&w copy as default,then in bit sw hide option of copy color selecting.
Did you solve the problem?
How can i reset it?
Check right screw, isn't too long?
Any part number of new rollers?
Take off rear left cover,then check if cable of sensor usb service port USB is connected
On service mode set correct destination area
I read post about using this developer on 8 series.
Hi. Is anyone use this DV 116 on other machines??
0.063A = 63mA
There's no chip.it's bizhub c220 series
Did you solve problem i've got exactly same in c220
change transfer belt
Hi.
Machine bh 421 could not enter to admin mode . password 12345678 doesn't access. i can't change it from service mode, machine freeze after enter code.
Machine version is 21, I read some...
did someone use developer dv110 on bizhub 250? , maybe only difference is in weight dv-110 200gr, dv-310 300gr
Hi,
I had similar problem i c353. i think mfp board needs to be replaced (this with memory)
they are separate: look at Ricoh Aficio SP 4100 / 4110 / 4210, Toner Recycling Components, Toner, Chip, Drum for printers
toner is mixing with developer while printing
You're wrong. cartidge contains: toner & developer !!!
Hi all,
first sorry for my english...
I need to remanufacture some ricoh sp4310 / sp4110 toner cartridges. The problem is that I have to change developer, I know that I can buy compatible but...
did someone resolve this problem?