Search:

Canon C7055 jam after print 10pages. Print total 50pages with 5 times paper jam. Paper jam before go in to fuser unit. Please help

My copier working good. Thanks so much all you

I replaced hopper CMY unit from another machine, no toner drop on paper but got new problem. Please help me
...

Ok I see, I will try to replace to another hopper unit

Thanks so much for all

Thanks so much, now color registration is ok but many cyan toner drop on paper, paper look dirty. I cleaned and replaced cyan developer unit but not change

I did not find REG-CLR in service mode 2

I changed power to 120V, it's ok. Thanks so much

My machine buy from USA, use power 110v

I checked patch sensor. It's ok but color mismatch. I did auto color mismatch adjustment but no change
...

I clear ERROR in service mode but not change. I saw the temperature of fixing increase up to 130 degree and then decrease. Monitor display error code E004-0101

Please help me this error E020-0081 on Canon C7055

My machine got error E004-0101 when power up. I replace DC board but still error. I also replace fixing unit but no change. Please help me

When I remove Developing assembly, I saw cyan toner on the catch sheet as below image

28707

Do you think that cause of toner collection sheet bias ???

Could you please show me the Sub-hopper unit and how to remove ?

Cyan toner drop many dot on prints. I replaced Cyan drum unit and developer unit from another machine working good, but not change. Please help me

Hi Mr.Teckat, if you need Imagepass A1 system software CD, I will share with you by Google drive

I re-install system software successfully on imagepass A1. Thanks Mr.Teckat so much

Thanks so much for Mr.Teckat

I checked HDD in imagepass A1. It got problem. I found System Software CD. How to re-install system software for Imagepass A1 ?

Server imagepass A1 can not start up. It display "please wait" and then reboot. I think software in HDD got problem. How to reset to factory ? I can not access in server menu

I bought used machine from US, no system CD

I need system software for Canon Fiery Imagepass A1. Anyone can help me ?

I replaced power supply board from another machine. Now machine working good. Thanks for everybody's idea so much

I refix error E000747-1201 by reseat connector between PCB 1 and 2. But now machine got error E000004-1010 when printing. Anybody have idea ?