Search:

!!

blob:http://www.copytechnet.com/31a71efa-6dcc-47fe-9491-6e05f7e30bd8 Problem solved! I replaced this switch (little piece of shit 😊) which is placed behind the main switch (On/Off). Anyway, thanks to...

Read the comments first buddy and then comment... I’ve checked every possible things before, the boards were the last things I’ve checked out...

Yes, tested in output check with the devolopment unit out of the machine, and the motor doesn’t running 😊

When the motor was running in Output check, the development unit was out of the machine 😊 P.S The same motor is working on another machine 😊

I’ve changed the PSU and the BICU, installed another motor from working machine, and still have the problem...

Hello everyone, I have SC 441 on Aficio 1075. I run development motor in Output check but the motor doesn’t run. P.S The same motor is working on another machine... Possible causes? Thank you 😊

It was helpful. thanks a lot :)

Hello, the machine starts throwing developer into a photoconductor case. I put another case with photoconductor and developer case from another functional machine, and still having the problem....

What could be an SC442 on MP C3500?? Please help...tnx

I was changing the toner bottle motor, and then the machine started showing open door, ive put back the old motor but still the same. Any help would be appreciated

That was the first step I've made :) The fuser exit motor works perfectly...checked the bearings, belts etc.

Yes the paper stops in the paper exit and it says thats its stuck in D, but it just Stops there, there is no mechanical hit, checked the fuser connector and there is no paper its clean. Its the same...

lct disconnected also still no work

sorry i forgot :) I've edited the post

There is no mechanical hit on the paper, it just stands in the paper exit no matter if its two sided or one sided. We changed the paper exit unit, changed the fusing unit, changed the duplex unit,...

What is SC380 on Aficio 2238C? Please help...tnx

The exposure lamp doesnt turn off, it doesnt moves when we turn the machine on, the machine shows no codes. This is about 3035 ricoh.
Any help would be appreciated.

We have a dead machine, it turns on, but when you try to copy, the screens go black and the machine freezes. We tried with a different PSU, and it worked, but we dont have any availible psu which we...

We tried inputing the values from the manual that comes with it, and it still cant complete the auto registration.

Thanks

When scanning or copying, the very last page stays in the ADF. Obviously, there is no paper jam occurring, because it's only happens on the last page.
It doesn't happen when it's making one-sided...

The machine is performing loading toner all the time. This is happening on 3 machines from the same type with original toner. We tried changing the toner pump, but no effect. Any advice would be...

Try to log in with user: admin pass: admin

What is SC440 on Aficio 2238C?

Lanier LD132C is the same with Aficio 1232C :)