Search:

error shown on printer:
solid red ink button
blinking power button

error shown on epson status monitor
ink cartridges not support for the printer all colors



now the ink im using is...

use you are rightshould of been one of the first thing i should of learned but he specializes in the hardware aspect of copier repair when it come to the soft ware side that's where i come in by...

thank you for the info how ever i didnt use the hex editor but using itas my keyword search i found the better and easier way to fix my problem
if i may ask however i would like to have a SD card...

my bad meant to say sp mode my phone auto predicted it -_-

after i have fix the color gray scales and entering the values from the in default page i have
i have discovered that the user tools admin and supervisor passwords have been change

now i know i...

thank you very much this was indeed the cause of my troubles

i have an lanier ld 420c

i have problem making color copies where the colors shade in the background i have done the line position adjustment in sp mode however did not solve it i have look though...

alright from toying around with the copier setting and wacthing it do it thing i've deducted that the dsk was made copy protection deleteing its info of the copy job that was job now does it
dsk...

in the machine where are these boards

ok i found the msu but not pcl
the msu loks like twin of the the other board how can you tell one a non dsk msu to a dsk msu

nks for the reply however i am an apprentice copier tech i've work on copier for under a year now. my boss doesnt know either what is it you can tell about these security kit is there a picture that...

is therer a way to change them options

i have a sharp arm 257 i have added a fax board to it however when i start it up i get the error code a0-01 which is a Security incompatibility error the board worked on the same model machince i...

Thank you so much this has helped alother i replaced four fusers before i thought to reset it

thank thatgood advice ill give it a try

wish i could the machince is out of town when i go see it ill bring a copy for ya

also i forgot to add the slip glass has been cleaned, roller cleaned, after stdying the adf i seen nothing that would skew the copies alignment

when making copies off of the adf the top of the page is lighter then it should be. also it "shifts" the image of the copy off center


this does not happen when copied from of the glass

...

paper jam for a brother intellifax 4100e all right paper jam right when it leave the tray and before it gets to the drum unit first copy gets suck there everytime cleaned the rubber rollers sensors...

Ello guys/gals this printer in working on while its printer or coping the paper looks as its jumps to far ahead and cause gaps in on the paper and Im not filamilar on working on inkjets
By any...

You are able to swap out the drums alone with out replacing the whole unit however this is only adviced to do if the drum is what's making a quality issues i have work on a few machine similar to...

Lol done something like this just once i was charging a sharp 137 toner unit

No one told me that they leak like hell

Both above reply are soild you may also try looking to see if the router is port blocking it

thank you very much finched doiing the line adjust worked

how do i got about dropping nvram onto a sd card?
des trhe sd card need to be formated to the machine

hey there i got a ricoh mp c2500 in the shop here
Image quality when scaned on the glass copies come out blured unaligned and shadowing
i have tried swaping out the psu's
transfer belt swaped...