Search:

Developer will be around £60... a complete new tank around £150 (plus the developer)

It sounds like you just need to change the developer.

And yes PWS would be a good idea... but you don't...

Have you got spare Magenta developer? You may just need to change the developer?

If you take the magenta tank out, take the top cover off and you should be able to see if the auger is working right by manually turning the connector on the back.

If the gears are obviously worn...

It looks like the Magenta developer auger isn't working correctly. The white plastic gears on the dev tanks tend to wear and it will stop the auger turning.

Ideally fit a new magenta developer...

Just updating this to include full details as being advertised elsewhere:

Digital Print (Xerox) Engineer/Operator


To support our continued growth we're looking to recruit a Digital Print...

Hello,


We're looking for a Xerox DocuColor/Docutech engineer in the UK (ideally in the south-west as we're based in Gloucestershire)


Majority of the work would be adhoc maintenance of our...

I'm not 100% sure on the 6060...

On the 5000 you have to take the panels off the back of the machine and you'll then see the boards.

There are two on the left of the Air Filter and 2 to the...

http://www.copytechnet.com/forums/xerox/29372-dc-5000-8-311-fault-code.html

Download the 8-311 PDF from this thread.

It's for a 5000 but I'm pretty sure the diagnostics will be the same for a...

From memory 8-311 is IBT belt alignment.

Try swapping the black drum.

If that doesn't work check the belt is positioned correctly and that the reflective patch is clean and sensor is clean.

Anyone done this for DC5000s?

Realise this thread is ages old and this won't be any use to the original poster, however you can reset NVMs on the DC5000 without a PWS.

From the Windows UI open the file search box and search...

Thanks for the reply!

Just thought I'd post an update to this in case anyone else gets a similar problem...

I should have said in the original post that the fault code was intermittent.

It...

Hello!

We're getting error code 6-368 on one of our DC5000s... just wondered if anyone could confirm what the error code relates to and what the fix is?

Cheers!

Hi guys,

Thanks for your replies.

We're still looking into this but it's looking like quite a good option!

Any other advice or tips people could give would be great!

Thanks again.

Hi Bojans,

Thanks for the reply!

We have a fair bit of experience as we already service what we can... we've rebuilt the fusers etc and have a decent understanding of the xerographics. We're...

Hello...

I've been reading various posts on the forum regarding diagnostics software and xerox parts etc... We've had Xerox equipment for close to 5 years but with yet another annual price rise...