Search:

Type: Posts; User: canonbundy

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    12
    Views
    7,651

    Re: E027-0400 AdvC5035

    Happy to be of assistance mate.

    Cliff.
  2. Replies
    12
    Views
    7,651

    Re: E027-0400 AdvC5035

    Hi, I've been away for a while however the fix for E027-0X00 (providing dev couplings etc are ok) is to remove the Hopper seals on not only the offending colour but the other 3 also, as they in turn...
  3. Re: LBP7780 - Door open displayed on PCs but not the printer.

    Thanks for the prompt reply JPiek, it appears to be a Driver /I.T./IP issue, apparently the school have recently had Server updates & is printing ok using xover cable - will let you know the final...
  4. LBP7780 - Door open displayed on PCs but not the printer.

    We have an LBP7780 which displays DOOR OPEN when attempting to print & will not print but only on the PCs & is not displayed on the machine or from the internal m/c website - internal prints such as...
  5. Replies
    6
    Views
    817

    Re: IRADVC5030 Black copy problems

    You definately do NOT have genuine oem Toner in the Hopper or the previous toner was not oem - cost us thousands to find out - oem 45/46 toner comes with the bottle in a plastic sleeve OPEN on BOTH...
  6. Replies
    1
    Views
    428

    ipf8300s Waste Ink Absorbers

    I haven't had much to do with ipfs however a need to install Waste Ink Absorber boxes has arrived, there doesn't seem to be anything in the manual for this - just wondering how difficult it may be -...
  7. Replies
    8
    Views
    3,510

    Re: Canon IR C5250

    If not the Fixing Drive Assy as Canuck suggested then check the free movement of the Fuser Cooling Fan F7 (behind Fixing Unit) - bushings can be lubed with light oil.
  8. Replies
    3
    Views
    610

    Re: Ir3570 exit sensor assembly

    Jam code? Exit could mean Fuser, 3Way Unit or Finisher.
  9. Replies
    4
    Views
    470

    [Misc] Re: ADV5200 SERIES Environment switch

    Thanks for that hidius, I will check it out when I get back from the Bush:rolleyes:.
    Cliff.
  10. Replies
    4
    Views
    470

    [Misc] Re: ADV5200 SERIES Environment switch

    Thanks for the quick response disam, I will check the Manual again - it makes sense ......in a way......but I preferred it after we installed the Cassette Heaters in the earlier machines that they...
  11. [Error Code] Re: e-studio 3511 blocked SAV (8+clear: code C970) help

    It's going back a while for me but I think it is the Main Charge Corona Cleaner not making home position - does it make a gear grinding noise? If so, try pushing the Charger in, as the gears wear and...
  12. Replies
    4
    Views
    470

    [Misc] ADV5200 SERIES Environment switch

    Other than the switch on the lower r/h side of the machine to turn the environment switch on for the Cassette Heaters, does anyone know if there is a Service Mode switch? As all the Units we have (in...
  13. Replies
    7
    Views
    785

    [CQ] Re: IRAC 5030 Black blobs of toner

    Maybe clean 2nd t/fer roller & its housing.
  14. Replies
    11
    Views
    1,312

    Re: Canon Ir7105 Unable to Book

    Guessing you can't get into Service Mode to check and clear an error - Fixing Unit etc, before the mc shuts down? If not.
    Try cleaning the contacts of ALL the PCBs, RAM etc in the Controller Box...
  15. [Misc] Re: Canon C5045i - (very) slow copying and printing

    Eatmorechips is absolutely correct - the grease inside the Fixing Film/Element has dried out, which usually occurs with low volume usage, the Film & Element (if not worn/damaged) can be cleaned with...
  16. Thread: ir 5055

    by canonbundy
    Replies
    3
    Views
    733

    Re: ir 5055

    As above then power off / power on.
  17. [Dead] Re: canon ir c3080 black screen, power light green on

    Could be a fixing unit error - turn on & check error history then clear error - PO/PO & post the result.
  18. Replies
    3
    Views
    586

    [Misc] Re: iRADVC5051 Paper tray not lift up

    Which tray doesn't lift & do the other trays lift?
  19. Replies
    9
    Views
    1,014

    Re: IR-ADV6065 toner leaking

    I gotta say, I have 2 Units side by side in a school which have done in excess of 2M prints without changing the ETB or Drum Blades ......... unreal by the sounds of the Posts - however I do have the...
  20. Replies
    13
    Views
    2,152

    Re: C5045 lines on magenta dv unit

    Seen it before - is it OEM Toner - hard lumps in Dev Unit? Replace with correct Toner- run skyshots (to deplete Hopper of old Toner) then replace Dev Unit. Then run Dev as a new install then full...
  21. Re: Toshiba E Studio 352 Install New Toner Cartridge

    And did the Bottle turn??? OEM Toner???
    There is a slotted coupling at the rear of the Orange Bottle housing which wears causing the Bottle not to turn even though the Drive is still turning -...
  22. Thread: irc3580i

    by canonbundy
    Replies
    5
    Views
    989

    [Misc] Re: irc3580i

    I would clean the Optics, Laser Glasses & Patch Detect Sensors then perform a full Autograd - assuming the Drum & ITB Units are good.
  23. Re: Canon IR3045 Network Scan - Color Document to Black and White Scan - Very Dark

    Maybe try White Level adjustment, SRV MODE - COPIER - FUNCTION - CCD - WTLV1 & WTLV2. Highlight WTLV1 place an A3 sheet on Platen Glass - ok, then highlight WTLV2 then place an A3 sheet in Doc...
  24. [Misc] Re: Canon Adv C5035 keeps initializing and restart

    Clean, reseat all contacts/connectors, addon pcbs, format/replace HDD - reinstall F/Ware:confused::confused:
  25. Replies
    2
    Views
    1,759

    Re: iR1024i - permanent jamming

    Sounds like feed clutch/solenoid is sticking causing pickup rollers to turn continuously.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4