Thanks that did the trick
Type: Posts; User: billm
Thanks that did the trick
we got this used it does not have the scanning option or the interface option it also has a meter of 8 I think that the NVM was changed by someone else how do I get the options back, there is nothing...
mpc300 fuser to a Ricoh mp c306 fuser i have coverted the spc 430 fuser to mpc 300 but not sure about the mpc 306 and do not have one to try it on
your knowledge is always helpful
I have had three different mpc 4502 that have had this problem. Whicham calling a negative effect for no other reason than to give it a name. Run sp 5801-08 printer feature execute, on some I have...
try resetting sp 5801 8 printer ap had something similar when printing pictures
I too have seen those bearing freeze up thanks for the Part number
Here is the bulletin BULLETIN NUMBER: D009/D011/D012/D013/D091/D092 – 053
32284
An SC324 occurs.
tried it but it just started making a copy HELD IT FOR 20 SECONDS OR LONGER
WOULD ANYBODY LIKE TO WAY IN ON THIS TOPIC
Any body trained on it
We just got some of these machines in and the standard ricoh service mode (CM,1,0,7,CLR) will not work.
Does anyone know the new procedure?
The problem is with printing only but
here is what you requested
did that no change
Ok got the sp1103-2 printed and scanned to my lap top it looks good to me. I get the fact that you can not fix the customer and am willing to blame the file if only I had the same problem with...
sp 1103 does not exist did you mean 4417-22 or 2109-21 they did work in the beginning of this night mare but am willing to get them to you
there is an example on page two of the PDF. The jpeg...
second that seen it more than once
3045530456
Here are examples that I brought home and scanned to email ignore the Blue line its from my scanner. First one is cmyk color charts that print just fine. Also have a auto color...
I was hoping that this thread had come to a resolution because I am having the same problem. with a lot of hits more people have seen this thread.
I did post my whole scenario in a different...
the blue line is from when I scan the customer prints to pdf. crud on the slit glass
my test from my lap top was a pdf internal print test good
the customer prints look washed out black missing when I print that file from my laptop same thing even with my test color file.
When I put that file on a thump drive to print it in the preview it...
I have the exact same problem with a mp c5502b color black is missing updated firmware to 2.14 no change when you look at the file in the preview for the thump drive it looks the same as it prints...
right out of the product support guide The Development Unit replacement at 320k does not require developer.
It is pre-loaded at the factory in a new unit.
I have been seeing a lot of the mpc4000\5000 with void line going from edge to edge in the direction of travel. Sometimes you can clean the laser slit glass and they go away sometime when you look at...
thanks for the info
Good job thanks for the heads up
Picture is worth a thousand words does it happen with internal prints
Just wondering what the meter is for laughs you know
try this sight for a striped web gear
http://www.natrading.com/file/Resources/Tech%20Bulletins/MP4000_Fuser%20Web%20Kit.pdf