Search:

Did you activate in technical mode Billing setting ?

good job but I'm happy I don't have those models in the field

I had the same problem but in 8 series it was a Cl8 in fusing drive section

First do a reset tool (a789be.tar) turn off and boot with the firmware.

I have a similar problem in which a client does not print from MAC in Chrome directly or converts it to PDF on a C250i but the client has another C250i and it does print. I verified that the one that...

test with the toner bottle detection sensor it has three pins and sometimes they bend

+1

I have changed a few belts due to breakage or noise, I usually carry a couple of them in my suitcase.

Maybe it can be in admin - network - http config - device name or admin- administrator setting - Administrator registration - name

I talked to KM yesterday and only the BH 5020i (Brother) can do SFTP. I have a Lexmark XC9235 (KM C258) in my storage and it does allow SFTP.

To minimize the generated noise, a special firmware GGD-84 was developed to reduce the switch back speed to
improve the generated noise in duplex mode.
As a side effect the duplex performance is...

+1 and I have a similar problem in 8 series

In KM forget it I think that I got them in Katun

Did you change the DNS?

+1 Does no one have new information?

Hello, was the problem solved with this solution?

I had something similar on a C364e, it was like a burn in a corner only in copy and scan. I had to change the lens and adjust the mirrors.

Hello, finally, how did you solve it? I have the same problem

System2 - 2nd Network setting and System1- Marketing area - Wireless LAN Destination

Try the recovery firmware ACM10Y0-F000-GXX-16.exe

I think I remember that you have to activate it in service mode

Maybe it's a silly question but is the usb formatted in Fat32?

i-series and 8-series have a problem with toner bottle detection, the sensor is deformed and does not recognize the cartridge. That would be the first thing I would check.

Search the forum there are several posts talking about this topic

Here https://www.copytechnet.com/forums/konica-minolta/148903-bizhub-c308-c368-error-code-c-d011.html?highlight=CD011+forum%3A40

Translate :good morning please if you would be so kind as to send me tb franco.fortun@gmail.com

the forum is english language