Back again: Those any one know where i can buy the ITB and ITB home position sensor for xerox 7232 ?
Please...Thanks
Type: Posts; User: yomba
Back again: Those any one know where i can buy the ITB and ITB home position sensor for xerox 7232 ?
Please...Thanks
I am have a biz hub 253. with no code on the screen. it just does not copy or print. it comes on fine the copy screen is good.when you copy or print nothing happens. I have gone through the service...
I need the Xerox 7232 service manual. does any one have any where I can get one please.
thanks.
Does anyone know where to get the ITB for xerox 7232 and the home position sensor ?
thanks.
Good day to the wonderful engineers out there. Am working on a xerox 7232 I can't get in the service mode. I have tried the Zero ten seconds and 6789 but it never enters the service mode. Am trying...
The copy/print quality is poor.
When you replace the ROS what NVM settings do change ?
[QUOTE=blackcat4866;590164]You can order a new scanner logic board, or send in your board to Hytec and have it initialized and proper firmware loaded. Do you have a board repair service available in...
Are there any settings
to change in the service mode after you replace the ROS ?
Upgrade the firmware to a current version.
I just replaced ROS on a Xerox 7120. Is there any settings I need to change in the service mode ?
Can you get Xerox manuals of individual machines? I don't mean edocs please.
Same as "ROS" does the same function as print head.......well almost
I have this persistence error code 077-131 on xerox 7232. i have re-seat the cables on the print head but it keeps coming back every few days. ANY SUGGESTIONS ?
Where can i get a used print head for a xerox 7232 copier ?
Can the drum counter on the Xerox 7232 be re-reset in the service mode ?
I will get the servicr manual and locate the two sensors.....Thanks
i have changed all four developing units . Still requesting for cyan toner
I am trying to load firmware on a km bizhub 600. I insert the CF card with the firmware on the machine but it does not recognize it. (nothing happens)
i just install two cyan toners in a muratec 3035. one after the other. it still asking for cyan toner. any suggestions. already changed the photo-sensor.
...
i just install two cyan toners in a muratec 3035. one after the other. it still asking for cyan toner. any suggestions. already changed the photo-sensor.
x700 is first choice and 252 second
you need to get the CD from Xerox
I have a frozen machine with error code 061-325 on a Xerox 7232
Check the fuser nip in service mode.
dC330 [010-203]
if that fails your next option would be the mc board