Are the copies light or blurred? If they are blurried, make single color copys (yellow, magenta, cyan, black) to see if the image is blurry. If the image is clear, the IT Belt is assemble is dirty...
Type: Posts; User: Lee251
Are the copies light or blurred? If they are blurried, make single color copys (yellow, magenta, cyan, black) to see if the image is blurry. If the image is clear, the IT Belt is assemble is dirty...
Check the finisher tray supports (the one with the white rollers). If they are bent, the tray will not go up and down smoothly and will cause noise.
I agree... a dirty developing cylinder. This could also be caused by worn spacer rollers.
An E-100 is no Beam Detect signal. The Laser scanner unit could be dirty or the laser shutter not opening. The linkage to the shutter is on the front door switch.
Try replacing the drum unit. The worn drum could be drawing too much current from the power supply, causing your E-733 code and jam 0212 code.