I just remove the document feeder and LIGHTLY push straight down on the left side of the frame right where the hinge mounts with the flat of my hand. It works just as good as all the hinge...
Type: Posts; User: Larryo
I just remove the document feeder and LIGHTLY push straight down on the left side of the frame right where the hinge mounts with the flat of my hand. It works just as good as all the hinge...
I think what rwynne is referring to is the use of the SPC811dn printer fuser assmbly in the MPC35/4500 (supply item from Ricoh, not part) It is about thirty to fourty dollars cheaper than the part...
Is the machine working? :) If so, is it at an account or in your shop?
I'm with nmfaxman. Looks like the cross bar spring that goes behind the securing screw.
Try dropping the temp. ten degrees. I've had succes with that in the past.
So I take it you aren't a factory authorized dealer? If you are and you are not waorking the waranty you are giving away money eveyr month. We warranty aroung ten thousand a month!!
Change the black toner pump. Very common on this model. IF you haven't done changed on before it will take a couple of hours.
If you are a dealer and are concerned about warranties (as you should be) you cannot warranty a unit from a pm kit. If you buy the kit, you have to warranty the entire kit, even if you use, say, the...
Thanks a bunch teckat. Replaced cl1 and cl2 and cleaned all the rollers in the path. Works like a champ! Thanks again!!
Hello all. Working on a very old Canon IR400. Registration varies from copy to copy. Need a part number for the reg. clutch. Parts book only shows CL1, CL2, etc. Need the main reg. clutch p.n.,...
I agree with Blackcat, Daveyball, everyone on this one. I have been doing this job since 1986 and have been a street tech up through GM. One thing has ALWAYS rung true: DO GOOD WORK. Your competition...
Understood, only I didn't ask for a manual. It's just like getting a telemarketing call out of the blue.
Thanks Blackcat. The sep. pad is brand new and was replaced as an assembly and the feed tire is new. I will try the longer spring and let you know the outcome.
As for the one always trying to sell...
I have a Samsung SCX-5530 that will double feed after three, five, sometimes six or seven copies. Replaced feed tires and sep. pad assembly. Looks like it overdirves and then double sheet feeds. Any...
Thanks evryone. HDD was disabled.
Every manufacturer has a "secret" code. Ever have to have the tech rep come out when a machine totally crashes and have them put the copy count back in? That's how they do it. No big secret, just...
I was a Konica Minolta tech and service manager a few years ago, then went to Kyocera and Ricoh. I know how to do the HDD check in sim mode but have forgotten how to enable/disable it. Is
there a...
I have a Biz Hub C353 that will not let me access the fax/scan function. It has the MK502 fax kit. I can perform a dial tone/ncu test in sim mode and get a dial tone, but when I push the fax/scan...