Thanks very much - its really appreciated.
I will take a look and see if there is anything helpful there.
Type: Posts; User: chrisio
Thanks very much - its really appreciated.
I will take a look and see if there is anything helpful there.
Sorry for the late repley. Would you be able to share them with me at all? I don't have pws.
As a trial I just connected the 2 knife trimmer to the machine without the harness and it just...
The engineer kindly printed off the page showing the separate wiring harness, however its too low resolution to decipher and make up the required cable and even on screen the image isn't clear...
Hi.
It was all supplied by xerox but the harness has been misplaced and its been sat in a corner for 2 months until I lost my temper with xerox who have now just gave me the trimmer and took it...
Sure, image attached.
Just a thought - if anyone has the harness and can take dome good pictures of the plugs and wires etc that would be a great help as well.
Cheers.54823
Hi.
I am looking for the install manual / wiring diagram for the 2-knife trimmer for the V80. Specifically looking for the section with the wiring harness.
It looks like we need to get a...
Thanks.
It was the sensor, it had become unpluged!
Cheers
Chris
Hi,
Got the above error on my printer (094-312) Done the restart with drawer out etc and nothing.. When the machine is starting up just before the error pops up there is a heavy clunking sound...
Thanks very much. Is that the fan that blows down onto the belt through the black ducting. I cheated the door open earlier and and powered the machine backup and ran 200 sheets through and all the...
Hi all.
This error has just popped up 048-318 which relates to a cooling fan in.the interface module. Is there a way to see which fan.has potentially failed?
Thanks
Chris
Fixed it!
No idea what I did to be honest... removed and reinserted the fuser a couple of times and exercised the lift mech for the fuser on the table out of the machine and its come good! how...
Thanks - will do - can you point me in the general direction of the sensor please.
Chris
Hi.
I have the v80 with the error code 099-341 according to Xerox I need to reboot the machine with the front door open and and the fuser tray pulled out and then reinstall. Having done this the...
Hi.
Getting random jams with the code 78-152 from the high capacity deck
it doesn't jam on heavy 300gsm+ card and only on the lighter stuff
I have changed the pickup rollers etc in the...
Hi.
I have a Xerox 770 running an ex770 fiery which is asking me to upgrade the command workstation - its currently running v5.7.0 and I can't see which version it wants to upgrade to.
I have...
I have the new board coming in the next day or so. Is it just a case of swapping the board and all my troubles will be resolved ir do I need to set it up?
Thanks
Chris
Thanks.
Is this the board https://www.iteminconline.com/105k20980_105k20980-xerox-docucolor-240-243-250-252-260-developer-bias.htm
Is there any tests I can do or is it a case of swap it out and...
Thanks. Where in the service manual does it refer to this? Nothing comes up when searching for it.
Cheers
Hi.
My dc242 is leaving a slight scattering of black toner over the entire sheet of paper- its so slight that when I scan the image its not picked up but if you hold the sheet next to a unprinted...
thanks. The tech has been out and been through everything - stopped the machine mid print and the image on the transfer belt had the deletions evident. Cleaned up everything possible he could see -...
Thanks - This all started from me swapping the yellow drum/dev out before which it was perfect (other than a worn drum) I removed and reinserted the drums, checked the transfer belt and I cant see...
Hi Everyone.
I have a problem with white lines / deletions occurring across all colours. If I print out pure cmyk you can see the white lines in every page in exactly the same position.
To me...
Thanks. I thought as much. I have flushed 70% of an original toner through now. I will get another drum and a pack of dev and swap it all out.
Lesson learned that it's more expensive to run the...
Ok. I made the mistake of using a compatible yellow toner when I couldn't get hold of a genuine toner and I have ruined the drum I can actually see little hard particles stuck on the cleaning blade...
Hi.
Thanks for the help everyone. I haven't pulled the machine apart to clean it all down just yet as things are busy at the minute but since replacing both black toners with brand new ones the...