The machine displays "Print unit error, replace Y".
I replaced the drum unit's chip and the message still remains.
Any ideas on what else could i do?
Type: Posts; User: bebe.radescu
The machine displays "Print unit error, replace Y".
I replaced the drum unit's chip and the message still remains.
Any ideas on what else could i do?
Does the printer need an firmware upgrade? How can i do it?
The machine doesn't print and displays on the lcd "Printer error Service Call 8". What doess the error code mean?
Epson Stylus SX435W - An ink pad needs service. Contact Epson. Where can i get the resetting tool for this printer?
I need a service manual for bizhub 421. please send it to me at bebe.radescu@yahoo.com, it would be much apreciated. thak you!
thank you very much! this helps me alot
xerox 5222 016-315 error code. how do i get past that?
HP 8500A doesn't print because it doesn't recognise the magenta and yellow cartridges although they are new. any ideas?
Xerox 5222. the first 10 copies have a black background that fades. after a while the copies are ok but if i wait a few minutes, the copies have again the black background. the image unit and the...
Xerox 5222 shows 092-910 error. Drum cartridge smart kit fault. Any ideas?
the machine shows service fuser error. i checked(measured) the thermistor, the temperature sensor on the fuser resistor, the resistor itself and they all seem ok. i don't want to buy a new fuser unit...
I took the dev unit out and cleaned it, installed new toner to make sure is not too old I installed the dev unit in the machine, I looked at the transfer roller after the dev unit filled with toner...
try cleaning the pickup rollers or replace them, see if there is any damage in the fusing unit, check the fusing film and eventually replace it.
Canon ir1600. The intensity of the image when it prints is low. What can cause this problem? I need to mention what i could do: i cleaned the laser unit(lenses, mirrors and the prism), i cleaned the...
I have a bizhub 210 with no network connection. Is it possible to make it scan files to the computer? If no, can i make it scan to computer thru a network by adding a network card to the machine?
KM bizhub 350, i need to replace the magnetic roller in the developing unit. Can i find the magnetic roller? or do i need to buy the whole developing unit?
i have a bizhub 210 wich jams the paper in the fuser.When i try to make a copy ,the paper exits half on the exit tray then the machine stops displaying paper jam.I checked the feeding rollers,feeding...
Km bizhub c250 transfer belt at it's life end, anyway, the transfer belt works just fine. I need to know if there's a chip or a way to reset it.
Thanks!
the sims show up but, format hdd shows up also, but is not available. i will do what you said and try again. thank you for helping me
the hdd was broken, i had it tested on a computer, i have a new one identicaly. still wont work
i tried that but the hdd format is not available. also, the hdd checkdisk jams at 0099.
kyocera km c2520 with a boken hdd.what is the procedure to replace the hdd?
The hard disk on my Kyocera CS2525E is burnt. Is a seagate 40gb ide 7200 rpm. How can i change it? What is the procedure for the machine to recognise a new hard drive? Do i have to get the exact same...
canon ir1020. the problem is i cannot install it on a pc via usb. it seems that the pc cannot recognize it as a printer. i downloaded the driver software from the canon website, the driver cannot see...
Ies, i did all that when i changed the developer. I checked, it is DV310, i checked to make sure that the counters are reset. Still the machine wont do more than 7k copies with brand new developer. I...