Search:

Type: Posts; User: SteveF

Page 1 of 2 1 2

Search: Search took 0.02 seconds.

  1. Replies
    3
    Views
    926

    Re: Sharp mx-3051 u2-70 ocr dic. Missing

    I have the same issue ..could I have the answer please
  2. Re: MP7001 I forgat the supervisor and admin password

    Hi .you need to go into factory mode and run
    Sp
    5-846-46
    That should do it
  3. Re: MP7001 I forgat the supervisor and admin password

    have you tried using rest admin and supervisor password sp on the machine ?
  4. [Dead] Re: Ricoh MPC4500, Dead after firmware Update Error

    hello
    have you tried pressing yellow key followed by pressing 1 then 4 then 3 then red key 3 times holding down on the last time ..
    turn machine off then on ..it might turn back on and not asking...
  5. [CQ] Re: MPC 5503 Android panel Firmware on a Standard Panel machine

    Hi Yes it is possible to load the smart screen firmware onto a normal ops panel machine . Ricoh say it will cause strange op issues ..the firmware 1.21 should be ok
    system copy D1495550t v 1.19...
  6. Thread: mx6240 E6-11

    by SteveF
    Replies
    3
    Views
    2,924

    [Error Code] mx6240 E6-11

    Hi all I am having an issue with E6-11 I have changed both control and PWB boards but still getting E6-11 scan lamp lights on test mode on the dspf but still has code
    Anyone have any ideas?
  7. Replies
    25
    Views
    13,052

    [Misc] Re: How to reset password on MP 4000 Ricoh?

    wow I hope you can follow that pdf .... ricoh official way to reset password is to replace nvrams
  8. Replies
    5
    Views
    653

    [Misc] Re: MP 4000 does not accept SDCARD.

    dose the sc code stay or are you only getting it when trying to update firmware??
    if only happening when trying to update can you remote into the machine through wim,, if you can you could try to...
  9. Re: How do you reset password on Aficio MPC 2500 from web image monitor.

    Hi luckerx
    you can reset the admin and supervisor passwords without having to replace the nvrams
    pm me and I will give you the info ...if you still need it
  10. Replies
    18
    Views
    2,760

    Re: mpc 4000 copy wraps around pressure roller

    I have had the exit unit seize up.. just enough to cause this might want to replace it or change bearings
  11. Replies
    10
    Views
    6,220

    Re: Ricoh Aficio 1022 ADF paper jam

    Hi
    on that df theiris a cushion stuck on the edge of the duplex gate ( to stop it making a noise ) it becomes sticky and stopps the gate opening on time or opening at all
  12. Replies
    18
    Views
    2,760

    Re: mpc 4000 copy wraps around pressure roller

    Hi
    Are you useing original toner for this machine or compatible ??
  13. Thread: Please wait!!!

    by SteveF
    Replies
    8
    Views
    1,368

    Re: Please wait!!!

    Hi You could try formatting HDD ..defo hard drive issue
  14. Replies
    15
    Views
    8,013

    Re: MX-5001 "cleaning transfer belt"

    has this machine got an lct fitted to it ??
  15. Replies
    4
    Views
    1,668

    Re: Ricoh TDC Manuals.

    defo 1.0.6
    has new 6502 and 3003
  16. Re: AF3045 shown massage" THIS SOFTWARE HAS ALREADY BEEN INSTALLED ON ANOTHER MACHINE

    print scan option has been merged with another sd card on another machine ..only way around it is to un merge scan print from the machine it came from
  17. Replies
    2
    Views
    959

    Re: Riso HC5500, printing on dark paper.

    turn off ccd for colour paper and paper detection
  18. Thread: comcolor 7050

    by SteveF
    Replies
    3
    Views
    742

    Nice machine :D

    Nice machine :D
  19. Re: MPC2500,3500/4500 Drive unit PCU connectors

    the connectors are part of the drive unit ..luckly i had an old drive unit off a scrap m/c and use the connectors off this ..no other way im affraid ..
  20. Thread: MP C5502 fusers

    by SteveF
    Replies
    18
    Views
    8,846

    The reset fuse is on the sp820 sp811 fusers u use...

    The reset fuse is on the sp820 sp811 fusers u use for the mpc4500 etc ..hope this helps
  21. Replies
    19
    Views
    10,694

    I agree with jisa Its the rotation time on press...

    I agree with jisa
    Its the rotation time on press roller..
    I had the same thing happen..
  22. Thread: MP C5502 fusers

    by SteveF
    Replies
    18
    Views
    8,846

    5502 fusers are a joke we have had 2 go down and...

    5502 fusers are a joke we have had 2 go down and had to source blow fuses for them when we rebuild them ..they carnt cope with medium coverage colour (dosent seal toner properly) they jam when they...
  23. Hello I think you need a hdd fitting . Print...

    Hello
    I think you need a hdd fitting .
    Print and scan sd card
    I think the parts you need are in the service manual under installation ..
  24. Replies
    1
    Views
    55

    Hi Blazer If you swop nvram from old control...

    Hi Blazer
    If you swop nvram from old control board to new one you should be ok ..nvram normally in a plastic case that is clipped into the board..
    If when you turn on the machine and the scanlamp...
  25. Replies
    41
    Views
    25,223

    "FACE PALM" back at ya

    "FACE PALM" back at ya
Results 1 to 25 of 49
Page 1 of 2 1 2