Does anyone know where can purchase original fuji xerox iiic6500 flat cable part number 962k 38430
Type: Posts; User: hsh6049
Does anyone know where can purchase original fuji xerox iiic6500 flat cable part number 962k 38430
against each laser flat cable can be exchange ?
owh ya noted with thanks
yes even test yellow no issue only magenta is not only white line will print out magenta it like something wrong with magenta , even replace new drum unit magenta developer and tank also same problem...
apeosport iii c6500 new dv tank new ori dveloper i did clean the glass inside the laser my
yes i did clean optics for the laser clean the laser my color machine model c6500
hi
i am really appreciated someone could advise with print test pattern 30 % a lot of straight line is it due on magenta developer tank
first , reading 0 when enter atc sensor setup, correction...
wow replace ccd it cost a lot money
HI
any idea how to solve this error fujixerox c6500 062-380 , if refer to manual agc fail
clean all the mirror check wire wht else i need to do , do i need to unlock
thanks
the reading for3001 01 56 .entrances seal is under good condition no leaking
thanks. a lot let me study the past record
supply toner unit & toner bottle motor rotating during working but toner bottle only rotate while photocopy up to 200pieces , if keep on photocopy the reading of vsg getting high up to 0.9 could not...
thanks a lot ...and could be exposure lamp overheat or not????????? use adf to copy 2books around 500++pages both sided ..is quite hard to get the scanner IO BOARD ..possibility lamp regulator board?
thanks for u reply....try to move this morning smooth
thanks for your reply.....switch on this morning it back to normal but after copy around ten copies sc142 again .....
hi all
i have problem with ricoh mp6001 sc142 after using ADF copy about 1500 pages books..... after finish around 30 minutes into sleep mode than wake up again
first appear sc101 than sc142
...
wht should i do next? ....now dvtank inside full of toner can i initialize 2801 again
i been try whatever i can the dv tank full of toner unplug the toner end sensor running about more than 1000 copies and back to normal but sp2223 reading 11v and also check dv motor everything find ...
mp7500 replace new developer 2801 initialize after that print out overtoning check everything fine ...finally 5801 all memory clear
and found out the 7 digits inside the 2801 erase so my question...
41921
hey guys have a look this, suppose the message with english but after first time switch on machine it become other language
wht would cause the machine change languange itself
thanks a lot
try already, even try to take off memory stick machine on...then please wait after that come with error code
i been try whatever i can beside exchange control board... mygoodness
hey guys
anyone ever solved sc672 issue...been try reconnect controlboad cable reinsert memory stick unplug hardisk
machine on..please wait and then come with error code sc672
please help
...
we name pcu unit.as drum unit