Ricoh MP402. left side of the printed/copied page is blank, I've tried: cleaning the LED array, changing the drum, checking drum unit (dv unit) at no avail. Have you come across this before?
Type: Posts; User: rapidocument
Ricoh MP402. left side of the printed/copied page is blank, I've tried: cleaning the LED array, changing the drum, checking drum unit (dv unit) at no avail. Have you come across this before?
They are scratches, drum coating is peeled off as you can see in the photo, and am using genuine OEM toner.
Here are the photos of the drum and the printouts, 592715927259273
I've already ordered the black drum unit because of this problem but I'd like to know why is this happening?, I've already visually checked the (black) drum unit and other parts and there no seems to...
HP M605, you turn it on and starts initializing, after the 1...2...3...sequence shuts down (all of a sudden),
Manual says to update the firmware but the problem is that it doesn't reach ready...
Yes, when I connect the USB cable the PC detects it.
Got this Kyocera Fs-2100dn to service at my shop (Heat roller change), tried to connect it via USB cable
using the Universal driver from Kyocera but I have been unsuccesful so far.
I am wondering...
Finally I was able to upload the photos:
4958349584
SHARP AR5520 Series.
Cleaned charge corona, transfer corona, put fresh developer, ran the developer simm, changed drum
the copy comes out with lines of developer or jams right at drum area.
I know...
the Counter resides in a ROM (read only memory) and is not possible to modify it. The only people allowed to do this are authorized Canon service personnel and they must have a valid reason to do it...
Canon iR1025n, As a copier produces very good copies, dark blacks, but as a printer you get poor solids
greyish text, I have selected different adjustments in the properties box (quality...
I'd try to clean and relube the fuser film, it might be running slower at a times and not passing the copy at correct speed, these models have known issues with their fusers.
P.S. Also the retard...
Well, that,
I have a Kyo TA220 in the shop that needs a new drum,
My supplier only has drums for Kyocera KM1620/1650.
the cleaning blade box states that is the same for KM1620/1650 AND...
Hello
Customer reported this Kyocera M3660 that won't boot up, just shows the Kyocera logo and after 10 minutes or so pops up F906 code. Machine is in a faraway location, I'd like to know in advance...
Also don't forget to clean and relube the transfer roller, shaft (metal part at each end) and the bushings, the old grease becomes sticky and hardens up causing jams, use conductive grease, not...
LIFETIME 6 YEARS
Introduction Date: https://www.precisionroller.com/images/co-qmark-13-side.gif 05/2016
I have a customer's machine, a M2035 collecting dust for this same problem. If you still there I'd appreciate your kind help. my mail is
rapidocument@gmail.com
Thanks in advance.!
check your pm
Yes, that's what I think too.
Thankyou guys.
Hello
A customer email' me to see if I can repair his machine, a Sharp AR5323d
I asked him to confirm the model number because I couldn't find it in my database nor in google,
and he says it is...
Do you still need it?
your email?
I don't see you mention the condition of the developing unit magnetic roller, paper dust builds up inside the developer blade and toner is not evenly distributed on the magnetic roller, thus making...
I've found the separation roller binds, I changed its spring for a slightly shorter one and noise diminished a lot, however I think now the separation torque limiter is the main culprit.
Check the...
Yes, the paper stops mid fuser because the machine detects a timing issue,
the timing problem started in the registration clutch,
Have you already checked the clutch (dissasembled it to see if its...