Thanks rthonpm
If it were a paper end sensor, would that create the fact that it pulled the second sheet out about 2 inches? Seems to me that its still a mechanical issue. But I will swap...
Type: Posts; User: rtiql8n
Thanks rthonpm
If it were a paper end sensor, would that create the fact that it pulled the second sheet out about 2 inches? Seems to me that its still a mechanical issue. But I will swap...
I forgot to mention that we replaced the torque limiter(s). We even replaced all rollers. Not just the separation roller. Any new thoughts?
My customer has a Ricoh 3352 bought new from us but now has 220k on it. The first paper tray will make a copy fine but the second copy jams every time. After making a single copy you see that a...
So this morning, I did a sp3045, calibrated the copier and exited the sp3045. Rebooted the copier and I now have a happy copier properly displaying all of it's flavors! No idea why but, I'm going...
But I am getting toner to the DV unit.
I swapped pumps to see if it was a pump problem. After I swapped them I checked for toner delivery in the DV units. Both pumps that I swapped are working fine. All bottles rotate fine as well.
I have the same problem. Does not see the new toner bottle. Tried two different OEM toners too. Did a SP 3045 and ran a couple of copies. They look great. Turned the SP 3045 back on and...
There was in fact a bad developer. This machine is new and the dev unit went bad at 150k. That has been replaced since my initial posting. So, the jury is out on weather the waste toner bottles...
ebay and Amazon are great places to start for Kits. If you were in San Diego I would love to help. That's what we do here. :)
try MSE. Welcome to MSE.com
That could be a scanner lamp thats not warming up properly. See if there is a firmware update on that machine on HP's website and tray again.
Are you looking for a Maintenance Kit? Or service?
the copier's waste toner bottle fills up after only 5000 copies. My tech cannot figure it out. Any help would be greatly appreciated.
The waste toner bottle fills up after only 5000 copies. It's done this since it was installed new last year. My tech can't figure it out. Help!