Search:

If anyone owns a hard disk image from the printer Xerox® Versant® 80 Press rather from the server EX-i 80 Print Server Powered by Fiery , please share or send to email angusyoung1794@gmail.com

The...

If anyone owns a hard disk image from the printer Xerox® Versant® 80 Press rather from the server EX-i 80 Print Server Powered by Fiery , please share or send to email angusyoung1794@gmail.com

The...

What is part for the bridge unit? or show photo that part.
my printer have same problem. some times sc224

Yes. Defect fixed with transfer roller TR-710.
weak springs

Was the problem in the transfer roller?

Great thx!!!

Please tell me the part number laser/scaner
if you know it
angusyoung1794@gmail.com

Please tell me the part number laser/scaner
if you know it
angusyoung1794@gmail.com

Please tell me the part number laser/scaner
if you know it
angusyoung1794@gmail.com

Please tell me the part number laser/scaner
angusyoung1794@gmail.com

u464 ?

please WorkCentre™ 7242 very need service manual
or say how change developer unit one color
angusyoung1794@gmail.com

If the problem persists, and with another new development unit of the new kit?
And me, I immediately and the developing unit and drum.

was
26644

and now
26645

period similar to the circle of the magenta shaft of the magnetic drum .
And this problem does not occur for the first time. The last time helped the new firmware...

Changed in the printer development unit magenta and the print quality was poor.
Magenta periods over the entire sheet. Calibration is performed.

pic here...

bad BGA welds main chip. or warm chip temperature of 300 degrees for two minutes or replacement formatter.

tried another drum with a different printer, but the problem is the same. Perhaps the other dramas and bad, but why black prints well?

23016how to solve the problem with the color? where to look for the cause? Who had similar problems? attached Image
https://www.dropbox.com/s/ez0vooe2pfbj7y1/clp510b.JPG

need exchnange or insert new dimm memory

look very closely. I think the drum can not scroll around. it's easy to see and hear with the open left cover. The motors are buzzing over another. should be treated with a strong jet of air to the...

need exchnange develoer unit or clean sensor toner into developer unit

need to change the memory вшьь on the board formatter.
To check you can remove it from the scanner. there is the same