We solved this problem..
It turned out to be a setting that is set at the factory, but is set incorrectly by default when the BCU and controller (and related ROMs) are replaced together. I don't...
Type: Posts; User: genius_at_work
We solved this problem..
It turned out to be a setting that is set at the factory, but is set incorrectly by default when the BCU and controller (and related ROMs) are replaced together. I don't...
I am referring to the PROC651/PROC751 (D074/M044) machines (not the C6501/C7501).
After I installed the new PCB components, the results for the SPs that are done during setup/dev replacement...
I recently had to change the BCU, BCU ROM, NVRam, and controller board. Now, the machine will produce prints, but it flashes between several toner-related errors. The errors are related to the toner...
If you've ever had a Ricoh/Savin/Gestetner/Lanier machine where the admin AND supervisor usernames/passwords have been lost, and you are locked out, this thread may be the answer you are looking for....
It may sound dumb, but check that the feed roller for that tray is in correctly. I had a jr tech install the feed roller backwards before. The 1-way bearing on the feed roller should be towards the...
ricoh use's smb for scanning to folder. use the address book create the scan user and fill in the info needed like path user name and password. usaully we create a seperate user for scanning. the...
I use the lubriplate grease shown above and it works fine as a high temp lubricant. The only downside is that it gives off a 'burning' smell for a little while after it is first applied. I usually...