Let me start by saying I've always use OEM Canon parts. BUT lately I've had a really bad run with fuser/pressure rollers like the FB6-6930 or the FC5-2285. Call me paranoid, but I keep noticing a...
Type: Posts; User: Juxta5
Let me start by saying I've always use OEM Canon parts. BUT lately I've had a really bad run with fuser/pressure rollers like the FB6-6930 or the FC5-2285. Call me paranoid, but I keep noticing a...
Yes, developing unit.
When I tested this unit it could print single sided endlessly. In fact it printed 96,000 additional single sided sheets after my first post. But the minute it duplexed the...
Oh, btw. No error codes with this one.
Was performing PM and strung new wires: Primary, secondary, separation and transfer. Did not replace array it has about 300,000 copies on it.
I make a copy, it looks good but a bit light. Went...
Okay, this is a rant. I simply do not know how you guys do it. I'm just under 5'2" and am petite... petite = small hands. So I'm working on replacing some DFC sensors in a paper feed unit and I...
Toon Town!!! ... kill robots by throwing cakes or dropping anvils on them... now that's fun.
It is difficult to be certain what you mean by "wrinkles" without being able to see a scan of an image.
If your paper is is exiting nice and flat than I would say you're having problems with...
So to date there is no real good solution for leakyness?
I am not sure if it is the economy and the fact that consumables are sitting around a lot longer in warehouses, or if they are being...
Something is eluding me... recent history with this machine was all just normal maintenance
1) Replaced Transfer Belt as a PM
2) Replaced Transfer Cleaning Assembly because replaced Belt;...
This type of equipment is exploding in popularity. After working on copiers I've found working on these to be super simple but am lacking service codes, schematics and part numbers. If anyone has...
I just read through this post and gotta say... explaining this to a non-service tech would have driven me nuts... job well done!
What I do is change the IP address on the machine to be in sequence with my business network. Then I go into Print Manager in XP, highlight the printer, go to Properties, Ports, Configure Port then...
It has only 650,000 clicks and the sample pic I attached shows the paper running landscape (paper feeds via the short side). The corona wires have been replaced recently, someone mentioned...
We are getting streaks running vertically on an 11" x 17" sheet when printing a 20% grey test.
The lines are very random (ruling out the drum?) and some are darker while others are lighter. What...
Here is a link to a site that gives a reliable description on how to use Static IP's instead of DHCP for Windows XP.
PortForward.com - Free Help Setting up Your Router or Firewall
The problem could be with using DHCP. That might explain why it works a couple times, or works with your laptop, then it does not work. DHCP can Dynamically change the IP address upon...
Thank you.
I was stuck because one person was saying one thing and another was telling me something else. You've helped clarify things, I'll have another electrician double check it.
We had an electrician install a dedicated line for a copier, I told hime we wanted 208V +/- 5%. (The copier documentation says it wants 208V.)
We checked the line that the electrician just ran...
Consumers have ultimate control over irresponsible professionals. With proper education a consumer will become a service providers best friend.
For example: Let's suppose that there is a vendor...
Your motherboard is a 24 pin because it was designed to accommodate a faster CPU and a faster graphic board. If you are using an on-board GPU (graphics built into the motherboard) and you are not...
Ha! Perfect and brilliant train of thought. Kudos to you. To hell with paranoia.
The count reset is a no brainer, it's wrong on so many levels. All of our copiers/printers are off lease & I would be really pissed off if I was deceived as to how much use a machine has seen.
I...
I weighted the feed roller on the bypass and it helped, but the image to paper registration still is inconsistent, about 1/8" variance.
I also checked the "Centering" adjustment in the Service...
On my printer it looks gorgeous! Printed on a Konica CF8050 -- baby sister to the 6500.
The color matches the PDF, but when it prints out it looks like a solid block of graphite gray. No...
I have an 8150 that is not putting an image in the same place on a page. When fed from the stack by-pass
For example, if a document is printed where all the crop marks are at 1" -- they print at...