Hello,
does anybody know this problem ? See attachment. Fuser unit FK-1150 (Kyocera)
New fusers are too expensive. I always repaired them using oil belts ordered from China. Repaired fusers have...
Type: Posts; User: lebo
Hello,
does anybody know this problem ? See attachment. Fuser unit FK-1150 (Kyocera)
New fusers are too expensive. I always repaired them using oil belts ordered from China. Repaired fusers have...
Thank you.
The problem was resolved. Problem with the MFPB board due to pure condition of the backup battery (integrated).
Hello,
after power on and long silent boot machine displays D38E (call service) and also displays button data recovery. After data recovery machine restarts the same way and displays the same...
Thank you for your answer.
As far as data capturing, they do not print using the printer driver. They copy(put) *.LKN files directly to the port of the printer.
I am going to get logs form the U964...
Hello,
please, can I ask you for help one more time again ?
The problem is, that macros are many times processed ok and sometimes are not.
Each printed document calls for printing A3 duplex sheet...
Hello,
I have such a strange problem In administrator mode (Bizhub C308). Numerick keypad does not open when I want to input numbers in any time. For example during configuration network or power...
Toner is always original and printed pages is summary cca 60-80 000
Please , have you tip for some alternative drum cleaning blades ??
I have many costomers with TA 306ci with low total counter and after 4 years all of them have bent cleaning blades :-( Changing...
Thank you, it works. Checking "Wisecore machine" resolved my problem.
They use command "Call" for calling makros in their printed document and it works well.
Some graphical objects are a bit...
Hello,
great thanks to you.
I will try it this way perhaps next weekend. I forward your advice about differences in prescribe commands to my customerīs programmer.
I will let you know here in...
Hello,
my customer uses makros saved on a CF card on the printer FS-9130DN. He uses a IC link network utility to save and maintain them to the CF Card inserted in the machine and calls them during...
Hello,
Lexmark x950de error 121.06
I replaced fuser unit.
I ran Error Code board menu by pressing 3+4+6 during power on.
I connect notebook to copymachine by USB cable to install print driver. ...
Hello, almost each Ecosys P2040dn and M2040DN that I sold has a problem with fuser (FK-1150).
The fusers after print cca 30-50 K pages starts to turn different speed which causes staining or jams....
Hello, I would like to consult a following problem with you.
The device: Bizhub C308, counter sits at about 30 000, mostly A4.
There is a jam 32-05 that happens every cca 300 pages.
The...
Even the distance of repeating is directly the same as a circumference of the photoconductor ?
Hello, I have inetersting problem with print quality (magenta). You can see attachment. "Interesting" because I changed magenta drum, magenta develop unit, transfer belt for new ones and the problem...
The problem was caused by HDD - Interesting, during my many diagnostic experiments I switched off ripping print job to the HDD (from Administrator menu) but this didnīt help me.
Format HDD resolved...
Yes, they are the same. I am sure, because I was moving finisher F-534 between them and I unified firmware on both machines before moving finisher.
Machine is receiving print job from PC but the...
Bizhub C224e - Problem with printing ""high resolution"" jpg.
One of my Bizhubs C224e can not print jpg with resolution large than cca 12 Mpx (spool print data cca 25MB) the another ones with the...
Thank you for your replay. Erace lamp is going well. It is possible that cyan photocondoctor roller is very old, I donīt know its history, my customer bought this machine at second hand cca two years...
Hello I am interested in your experience.
Problem: Blue messing at the edge of the papers, caused by cyan developing unit.
I can see the developing unit has irregular magnetick brush ( very pure...
It was caused by main board.
Hello, I can not force Scan from the Bizhub C200 through SMB to PC with Windows 10.
Any Idea ?
Login, Password, name of shared folder as well as IP adresse of PC are all set OK
PC is in Private...
Hello,
After changing of waste toner bottle I still got the same error message.
Waste toner bottle goes well in another machine.
I disconnect the waste toner bottle contact block from controller...
Thank you very much,
Iīve already done founding out that only all drive fuser assembly can be ordered.