Only glad to be of help to you.
Type: Posts; User: Printmend
Only glad to be of help to you.
Changed the SMPS board (power supply) and it solved same problem.
Think the problem is C102 & C104 capacitors on the board.
Hi all,
I have a xerox colour 550 that will not duplex print at all and will not print from any of the paper sources only the bypass tray.
Looking at a sensor or motor problem I think.
Any...
Hi all,
I've got a Canon Maxify Mb2155 with support code 5205.
Machine starts up but error code comes up practically straight away..
Any info greatly appreciated
Hi
No resolution, tried the interconnect board too.....
Hi
Yes I followed the manual and checked the formatter light, it is just the first one that is on.
Tried everything except the panel but it is a crazy price, over €700.. Don't think its worth...
I got this sorted by updating the firmware from a different laptop and it worked straight away.
Thanks for all the replies
Hi guys,
I have a HP pagewide pro MFP 477dw with the following error code, any help or advice greatly appreciated.
Print functionality is disabled
Error code :Oxc6fd0902
OK great thanks Kiran for the advice.
OK thanks Lance, I'll have to go searching for a cable so!
Any different procedures for the update?
I have a hp designjet 500 that needs a new black printhead.
In order to install it i need to update the firmware as it states on the package.
When i run the installer it goes through all the steps...
HD and formatter tried too...
OK I tried the electronics module with the PSU and it is still doing the same thing......
Any more ideas out there???
OK there is no jam code, when you go through the jam removal procedure it puts out a blank page & then calls up the jam again.
Paper size is ok, rollers ok. Not a multi-function machine, only...
OK I will check the bushings, I didn't notice anything wrong with them and rollers were rotating freely on initial inspection.
No sign of damage to guides either.
I will take another look and let...
Hi all,
I have acustomer with a CANON LBP7660Cdn with the following message coming up but there is no paper jammed in the machine
- PAPER IS JAMMED MP TRAY AREA + DRAWER 1 AREA
Any ideas...
Please refer to images attached.
Image M6026 show the printed page folded beside an A4/letter size sheet. This is the way it comes out of the machine, folded perfectly straight & flat with no paper...
No jam code as the page is not getting jammed.. Page comes out folded perfectly onto the exit tray
HI ALL,
I've got a Kyocera M6026 that is folding the paper perfectly @ 60mm on every print.
It appears to be doing it before it enters the fuser where the fold is then perfected!
Any help...
Thanks Phil for your reply. These HP machines are crap when they get a bit of volume done...
Hi all,
I've got a HP pagewide pro MFP 477dw that will not print any black, colours are fine.
Have done all the usual printhead cleaning but no luck..
Think it's the print bar that's gone??
Have...
Hi
As you can see from the photos attached in the thread it is pretty much all over the page and the black drum is covered in the same pattern as the print out.
Machine has hardly been used and I...
I cleaned all the contacts but no luck, still the same issues.
I really think the black drum is the main cause, going to see if I can get one and take it from there.
Thanks guys,
Sandmanmac- your way worked.
Thanks for the help.
HI
How do you access service mode on a Ricoh SP C342 printer??
Can't find it in the service manual..
Need to clear SC542 fuser error.