I used to have to work on a Canon irc3380 that was a 4.5 hour drive one way and it wasn't any shorter coming back, and yes the service call was spendy. It was $75 or $150 just for me to drive out...
Type: Posts; User: time2fly
I used to have to work on a Canon irc3380 that was a 4.5 hour drive one way and it wasn't any shorter coming back, and yes the service call was spendy. It was $75 or $150 just for me to drive out...
use the right HDD
You need to use the 80ma fuse.
amen Hansoon. Replace the developer, the whole unit. It's better that way.
What would cause the the paper guide to close too much while running 11x17 paper causing jamming, only when saddle stitching? This has happened on two different finishers, same model but one was new...
Thats the way I always did it, it just makes sense. Usally at the upper end of the IP range.....
If you put the communications utility in the startup folder it will always be running even when the computer is shut off and turned back on again.
alot of times the tray is in the storage cabinet. The part # is DAXP600. This is the part # for the kit that includes the tray and the exit roller, you have to change out the exit roller.
Go to this web site get the number to call the office in Pheonix ask for Ray in Salt Lake City he may be able to help: www.digital-tfg.com Good luck
Should you look the other way if the company you work for or used to work resets the meters on the refurbished copiers they sell, and telling the customer that the copier has a real low meter? The...
I say amen to that apache, I personally think that if you want your customers to buy a copier from you when the lease is up then it's important to take good care of that customer and to treat all of...
The reason they would use a wireless to USB is so wireless laptops that come and go can print without trying to look for a cat5 wire or even a plug.
use www.rapidshare.com for the transfer
yup battery, do that and that should clear everything else.
Whats the PM count? If it's on the high side I would do a PM and replace the drums. (OR THE WHOLE MACHINE, THEY MAKE REALLY GOOD BOAT ANCHORS). These copiers are always ineed of adjustment.
That sounds about right, If I remember right the fuser on those machines seem to be a little on the hot side (yea I know there hot) but hotter than some others.
Make sure it's not coated paper for ink jet printers as this will cause the same type of problem, usually all over the page. Like cd said it may be that the paper has a lot of moister in it.
Check the fuser area usually when a copier first starts then shuts off right away it's something in the fuser, a thermister or a thermostat. on the left side under the the main front cover there is a...
Need more info meter, old or new drum etc. I have never herd of developer resetting you normally have to replace it when you do a PM
It means get a Canon!!!! Just kidding Here's what it says in the SM:
PCL connection
abnormality
E23-04
(Di5510/
Di7210)
Failure of PCL connection is detected. PCL
Hope this makes sense,...
If you're looking at color I would look at Canon iRC series or Panasonic C series They are much more reliable than KM better built and better image. I've worked on all 3, and found that Canon are...
did you low level format the drive? It shouldn't take 4 hours to format, maybe to system software. Try low level formatting the drive, go to this site to get the free software. I've used this to...
still looking...........
Hey everyone give these guys all the software they need, then turn em lose on there copier. When it's really screwed up maybe then they'll be smart enough to make that call to someone who actually...
Dude you would be soooo much better off and money ahead getting a new or used CANON iR3320i or something like that they're not much money used and sure would be better then that piece of crap Konica...